In recent years, a number of proposals for electrocardiogram (ECG) monitoring based on mobile systems have been delivered. We propose here an STM32F-microcontroller-based ECG mobile system providing both long-term (several weeks) Holter monitoring and 12-lead ECG recording, according to the clinical standard requirements for these kinds of recordings, which in addition can yield further digital compression at stages close to the acquisition. The system can be especially useful in rural areas of developing countries, where the lack of specialized medical personnel justifies the introduction of telecardiology services, and the limitations of coverage and bandwidth of cellular networks require the use of efficient signal compression systems. The prototype was implemented using a small architecture, with a 16-bits-per-sample resolution. We also used a low-noise instrumentation amplifier TI ADS1198, which has a multiplexer and an analog-to-digital converter (16 bits and 8 channels) connected to the STM32F processor, the architecture of which incorporates a digital signal processing unit and a floating-point unit. On the one hand, the system portability allows the user to take the prototype in her/his pocket and to perform an ECG examination, either in 12-lead controlled conditions or in Holter monitoring, according to the required clinical scenario. An app in the smartphone is responsible for giving the users a friendly interface to set up the system. On the other hand, electronic health recording of the patients are registered in a web application, which in turn allows them to connect to the Internet from their cellphones, and the ECG signals are then sent though a web server for subsequent and ubiquitous analysis by doctors at any convenient terminal device. In order to determine the quality of the received signals, system testing was performed in the three following scenarios: (1) The prototype was connected to the patient and the signals were subsequently stored; (2) the prototype was connected to the patient and the data were subsequently transferred to the cellphone; (3) the prototype was connected to the patient, and the data were transferred to the cellphone and to the web via the Internet. An additional benchmarking test with expert clinicians showed the clinical quality provided by the system. The proposed ECG system is the first step and paves the way toward mobile cardiac monitors in terms of compatibility with the electrocardiographic practice, including the long-term monitoring, the usability with 12 leads, and the possibility of incorporating signal compression at the early stages of the ECG acquisition.

No abstract

No abstract

It has been determined that the sessions with EMDR methodology applied in a digital form, allowing the psychotherapist treating patients with psychological disorders, and whereas there is currently no way to provide the methodology in this way, the next project is focused on the development a prototype that generates visual, auditory and tactile sequences used by this methodology in a manual or automatic way to provide therapy sessions to Psychotherapist. The control software for the prototype was developed on the Android platform to be deployed on mobile devices, allowing the Psychotherapist from your smartphone or tablet to control the type and speed of the sequences in all modules, the kind of sound in the ear module and the duration of the vibration on the tactile module. Additional software includes a database to record patient data. The interaction of the user that uses Android device psychotherapist and the patient is given by an IOIO board and a hardware adapted for the purpose. Psychotherapists who used the EMDR system showed a reduction in treatment times of 20-30 minutes per session. Psychotherapists reported that physical fatigue was reduced by a margin of 90 percent and mental fatigue by 75 percent in the traditional way of providing EMDR patients, allowing more consecutive sessions provide the same quality of treatment initiation to the end of his workday.