This article reports on the International Nanofluid Property Benchmark Exercise, or INPBE, in which the thermal conductivity of identical samples of colloidally stable dispersions of nanoparticles or "nanofluids," was measured by over 30 organizations worldwide, using a variety of experimental approaches, including the transient hot wire method, steady-state methods, and optical methods. The nanofluids tested in the exercise were comprised of aqueous and nonaqueous basefluids, metal and metal oxide particles, near-spherical and elongated particles, at low and high particle concentrations. The data analysis reveals that the data from most organizations lie within a relatively narrow band ͑Ϯ10% or less͒ about the sample average with only few outliers. The thermal conductivity of the nanofluids was found to increase with particle concentration and aspect ratio, as expected from classical theory. There are ͑small͒ systematic differences in the absolute values of the nanofluid thermal conductivity among the various experimental approaches; however, such differences tend to disappear when the data are normalized to the measured thermal conductivity of the basefluid. The effective medium theory developed for dispersed particles by Maxwell in 1881 and recently generalized by Nan et al. ͓J. Appl. Phys. 81, 6692 ͑1997͔͒, was found to be in good agreement with the experimental data, suggesting that no anomalous enhancement of thermal conductivity was achieved in the nanofluids tested in this exercise.

A digital holographic technique is implemented in a microscope for three-dimensional imaging reconstruction. The setup is a Mach-Zehnder interferometer that uses an incoherent light source to remove the coherent noise that is inherent in the laser sources. A phase-stepping technique determines the optical phase in the image plane of the microscope. Out-of-focus planes are refocused by digital holographic computations, thus considerably enlarging the depth of investigation without the need to change the optical focus mechanically. The technique can be implemented in transmission for various magnification ratios and can cover a wide range of applications. Performances and limitations of the microscope are theoretically evaluated. Experimental results for a test target are given, and examples of two applications in particle localization and investigation of biological sample are provided.

We propose and test a focus plane determination method that computes the digital refocus distance of an object investigated by digital holographic microscopy working in transmission. For this purpose we analyze the integrated amplitude modulus as a function of the digital holographic reconstruction distance. It is shown that when the focus distance is reached, the integrated amplitude is minimum for pure amplitude object and maximum for pure phase object. After a theoretical analysis, the method is demonstrated on actual digital holograms for the refocusing of pure amplitude and of pure phase microscopic samples.

No abstract

We investigate a digital holographic microscope that permits us to modify the spatial coherence state of the sample illumination by changing the spot size of a laser beam on a rotating ground glass. Out-of-focus planes are refocused by digital holographic reconstruction with numerical implementation of the Kirchhoff-Fresnel integral. The partial coherence nature of the illumination reduces the coherent artifact noise with respect to fully coherent illumination. The investigated configuration allows the spatial coherence state to be changed without modifying the illumination level of the sample. The effect of the coherence state on the digital holographic reconstruction is theoretically and experimentally evaluated. We also show how multiple reflection interferences are limited by the use of reduced spatial coherent illumination.