No abstract

This paper deals with numerical analysis on the mechanical behavior of ultrahigh performance concrete (UHPC) under uniaxial compression. For the modeling of the mechanical behavior of UHPC, the mesh‐free discrete element method was applied. To calibrate the model parameters and validate the numerical simulation results, a set of experimental investigations including mechanical tests, microscopy and tomography analysis, were performed. The scanning electron microscopy and polarized light microscopy were used to examine cross sections of UHPC as well as to characterize interfacial transition zone and aggregate in detail. X‐ray microtomography analysis was used to obtain information about the nonspherical shape of aggregate and to generate a realistic structural model. Simulation results have shown that the developed model predict stiffness reliably, strength, and breakage pattern of UHPC and shows good agreement with experimental results. Finally, the model has been applied to analyze the main crack initiation in static failure and to investigate the influence of different parameters such as aggregate content as well as aggregate and binder stiffness on the mechanical behavior of UHPC.

In view of the growing demand for sustainable and lightweight concrete structures, the use of ultra-high-performance concrete (UHPC) is becoming increasingly important. However, fatigue loads occur more frequently in nature than static loads. Despite the impressive mechanical properties of UHPC, a reduced tolerance for cyclic loading is known. For this reason, our paper deals with experimental and numerical investigations regarding the main causes for crack initiation on the meso, micro, and nanoscale. After mechanical fatigue tests, we use both scanning (SEM) and transmission electron microscopy (TEM) to characterize microstructural changes. A new rheological model was developed to apply those changes to the mesoscopic scale. The origins of fatigue damaging can be traced back to a transformation of nanoscale ettringite, resulting in a densification of the surrounding binder matrix. Additionally, a higher content of unhydrated cement clinker in the matrix benefits fatigue resistance. On the mesoscale, stress peaks around aggregate grains expand into the surrounding binder with increasing load cycles and lead to higher degradation.

No abstract

No abstract