The overall idea and research interest related with the development of sustainable port infrastructure evolved around the core requirements of continuous reduction of negative environmental impacts without jeopardising economic growth. The growth of trade activities and need for competitiveness on the global market are forcing ports around the world to systematically and continuously evaluate all possibilities for the optimisation and related costs reduction. On the implementation level, the greatest challenge is how to empower workers, who operate machines and work on the shop floor, to achieve enduring performance improvements. Presented research work provides a methodological approach for finding realistic solutions to the problem of the future development challenges of seaports. The case study shown in this research represents a practical application of the green port concept with the emphasis on the overall energy efficiency improvement based on testing, deployment and demonstration of energy efficient solutions. Additional emphasis was placed on the state-of-the-art technologies and developing pilot initiatives based on modern energy solutions designed to improve efficiency in fuel consumption and emissions reduction in rubber tired gantry cranes.

No abstract

A dredging process is essential for the development of harbours and ports, allowing the functional daily operation of the port. The management of dredged material represents a worldwide challenge, especially considering unwanted deposition of material. Because of their chemical, petrographic, mineralogical and homogeneity composition, marine sediments could represent an appropriate raw material for the brick industry, particularly for the production of clay blocks, roofing and ceramic tiles. In this study dredged material from Port of Koper was tested for such use, thus various analyses were carried out in order to determine if the dredged material is environmentally friendly and suitable for use in the brick industry. These included: chemical analysis, mineralogical analysis, particle size analysis, chloride content analysis and tests of firing in a gradient furnace. Furthermore, tests of mechanical properties, as well as tests of the frost-resistance of the samples were carried out. On the basis of the primary analyses and samples prepared in a laboratory, it was confirmed that marine sediments from the Port of Koper, without any additives are only conditionally suitable as a source material for producing brick products, because without additives they exhibit too much shrinkage on drying and firing, as well as high water absorption, this can be improved by the incorporation of suitable additives, for example, virgin clay or other suitable waste material. The approach described herewith can also be followed to assess sediments from other ports and rivers regarding its potential use in clay brick sector.

No abstract