No abstract

No abstract

An experiment was conducted to evaluate the initial wake expansion in scaled wind turbine tests as a means to guide future wake interference studies. Five scaled wind turbine rotors with different diameters were designed for testing in a closedloop water channel to evaluate the effects of blockage on the initial wake expansion behind a wind turbine. The initial wake expansion was assessed by using quantitative dye visualization to identify the propagation of tip vortices downstream of the rotor. The thrust coefficient developed by the scaled models was recorded using a six-component balance and was correlated to the downstream wake expansion. The rotors used in the experiment were operated at a tip speed ratio of 6, a Reynolds number based on the tip speed and tip chord of approximately 23,000 and resulted in blockage values that ranged from 6% to 25%. Dye visualization indicated that the initial wake expansion downstream of a rotor was narrowed and that tip vortex pairing behaviour was modified because of increasing blockage. Blockage effects were significant and resulted in a wake that was more than 50% narrower when blockage was 25% compared with the observed expansion with 10% blockage. A computational simulation was conducted with the Generalized Unsteady Vortex Particle (GENUVP) discrete vortex method code using the rotor in freestream conditions and was compared with the experiments. The magnitude of the wake expansion in the freestream computations was similar to the wake expansion in the experiment when blockage was less than 10%.

A method of increasing the performance of wind farms has been established by limiting the lateral separation between neighbouring wind turbines. The close proximity of the wind turbines creates a beneficial in‐field blockage effect that results in a core of increased speed that is accelerated through the gap between the turbines. A preceding study indicated that the performance of three wind turbines can be increased by over 10% with tip‐to‐tip separation of 0.5 diameters (D) compared with the power output of the respective turbines in isolation. A corresponding flow‐mapping study has been completed in the current work using a single‐normal hot‐wire anemometer to characterize the increased flow speed through a narrow lateral gap, leading to the observation of a region of increased speed that occurs between 0D and 2.5D downstream of the gap between laterally spaced wind turbines. The experimental results were confirmed by conducting a series of computational simulations with the generalized unsteady vortex particle discrete vortex method code. The simulations were conducted with three rotors arranged in five different configurations, and the increase in power generated by the multi‐rotor configurations closely followed the observed experimental trends. The closely spaced lateral wind turbine configurations may have the ability to increase the annual capacity factor of wind farms while reducing wind farm land use requirements. Copyright © 2014 John Wiley & Sons, Ltd.

No abstract