This paper investigates experimentally and analytically the cyclic fatigue crack growth in piezoelectric ceramics under electromechanical loading. Cyclic crack growth tests were conducted on lead zirconate titanate (PZT) ceramics subjected to dc electric fields, and a finite element analysis was used to calculate the maximum energy release rate for the permeable crack model. Based on bending experiments using single‐edge precracked‐beam specimens, cyclic fatigue crack growth rates are found to be sensitive to the maximum energy release rate and applied dc electric fields. Possible mechanisms for crack growth were discussed by scanning electron microscope examination of the fracture surface of the PZT ceramics.

No abstract

This paper describes an experimental and analytical study on the static fatigue behavior of piezoelectric ceramics under electromechanical loading. Static fatigue tests were carried out in three-point bending with the single-edge precracked-beam specimens. The crack was created perpendicular to the poling direction. Time-to-failure under different mechanical loads and dc electric fields were obtained from the experiment. Microscopic examination of the fracture surface of the piezoelectric ceramics was performed as well. A finite element analysis was also made, and the applied energy release rate for the permeable crack model was calculated. The effect of applied dc electric fields on the energy release rate versus lifetime curve is examined. The most important conclusion we reach is that the lifetimes for the piezoelectric specimens under a positive electric field are much shorter than the failure times of specimens under a negative electric field for the same mechanical load level.

No abstract

No abstract