Low specific-activity scales consisting of alkaline earth metal carbonates and sulfates are often present in some gaseous and liquid hydrocarbon plants. These scales contain a certain concentration of radium, uranium, and thorium which can cause a risk of gamma irradiation and internal radiocontamination when they must be mechanically removed. The gamma dose rates and the 238U, 232Th, 226Ra concentrations were determined in sludges, scales, and waters of some gas and oil hydrocarbon plants located in Italy, Congo, and Tunisia. 238U and 232Th concentrations were were low. The isotopes 238U and 234U resulted in radioactive equilibrium, while 232Th and 228Th were not always equilibrium. A rough correlation was found between the gamma dose rate and the 226Ra concentration. Some considerations and conclusions about radiation protection problems are pointed out.

In the present paper a mathematical model for a mini-channel heat exchanger is proposed. Multiobjective optimization using genetic algorithm is performed in the next step in order to obtain a set of geometrical design parameters, leading to minimum pressure drops and maximum overall heat transfer coefficient. Multiobjective optimization procedure provides a set of optimal solutions, called Pareto front, each of which is a trade-off between the objective functions and can be freely selected by the user according to the specifications of the project. A sensitivity analysis is also carried out to study the effects of different geometrical parameters on the considered functions. The whole system has been modeled based on advanced experimental correlations in matlab environment using a modular approach.

Worldwide energy policies are moving towards a reduction of fossil fuels' share in the energy mix and to invest in renewable and green energy sources. Biomass is one of these, and it represents, in the form of sugarcane, a strategic source in Colombia, especially in the Valle del Cauca. In this region, the sugarcane industry is able to convert the energy content of the cane into different energy products, such as ethanol, electricity, and high-pressure steam, which are cogenerated via bagasse combustion. In this work, the case of a sucrose and ethanol production plant, which mills ten thousand tons of sugarcane per day, is considered. A tailor-made computational model was developed to assess the energy and material process balances in order to estimate the effect of different operating conditions on cogeneration boilers and turbines, and to optimize the overall process efficiency. The current situation was modeled with good precision from the developed model. Likewise, the concept of "Renewable Efficiency" was introduced to explain the degree of green power, which a process plant is able to produce. Consequently, new innovative solutions and process layouts were proposed in order to increase their renewable efficiency. With the new configurations, a convenient energy surplus of up to 33 MW can be reached, which could be sold in the national electricity grid, representing long-term interesting economic benefits for the company. OPEN ACCESSEnergies 2014, 7 5875

No abstract

No abstract