Back‐side diffractive gratings enhance a solar cell's efficiency by trapping light inside the cell and increasing the probability of absorption. We introduce a three‐dimensional, polarization‐sensitive optical model combining ray tracing and rigorous coupled‐wave analysis to investigate silicon solar cells with pyramidal front‐side texturing and back‐side gratings. Parameter optimization is performed to increase the short‐circuit current density for a linear binary grating with grating period p and height h. For the investigated 180‐µm‐thick pyramidally textured silicon solar cells, the simulation yields a maximum enhancement of the short‐circuit current density by ΔJSC = 1.79 mA/cm2 corresponding to an absolute efficiency increase of Δη = 0.90%. Furthermore, we report on fabrication and reflectance measurements of solar cells with gratings and key challenges in achieving efficiency gains using back‐side diffractive gratings. Copyright © 2012 John Wiley & Sons, Ltd.

We present the technological verification of a size-optimized 160-channel, 50-GHz silicon nitride-based AWG-spectrometer. The spectrometer was designed for TM-polarized light with a central wavelength of 850 nm applying our proprietary "AWG-Parameters" tool. For the simulations of AWG layout, the WDM PHASAR photonics tool from Optiwave was used. The simulated results show satisfying optical properties of the designed AWG-spectrometer. However, the high-channel count causes a large AWG size with standard design approaches. To solve this problem we designed a special taper enabling the reduction of AWG structure by about 15% while keeping the same optical properties. The AWG design was fabricated and the measured spectra not only confirm the proposed size-reduction but also the improvement of optical properties of the size-optimized AWG.

No abstract

No abstract

No abstract