No abstract

Common rail direct injection system (CRDI) offers the potential to achieve optimal combustion and emission characteristics. An empirical analysis of engine combustion process incorporating Wiebe type burn rate law approach is useful not only in understanding the combustion characteristics of a CRDI engine but also aids in diagnosis and control of the combustion process wherever required from the performance and emission standpoint. This paper presents a methodology for applying the burn rate law for common rail direct injection diesel engines adopted with split injection by using Wiebe’s correlation. The analysis reveals that while the empirical constant ‘m’ (shape factor) for both pilot and main injections is independent of engine load and seems to be affected by engine speed only, the constant ‘a’ (efficiency parameter) seems to be influenced by the engine speed, load and injection conditions. A correlation for these empirical constants with the respective parameters of dependence can be formulated which can be used to analyze the effect of change in engine operating conditions on combustion characteristics without conducting engine experiments.

Increase in engine speed increases the in-cylinder turbulence and hence the rate of mixing. However, it is difficult to directly measure the mixing rate and relating its effect on emissions. Hence, in this paper, the comparison of mixing rate at different engine speeds are demonstrated with a multi-zone phenomenological model which has been developed and validated on a wide range of engine operating conditions. The mixing rate is evaluated using a standard quasi-dimensional k-ε formulation. The quantitative predictions of mixing rates at different engine speed substantiate the cause of soot emission reduction at higher engine speed.