The appearance of free, weakly fixed and foreign objects in the main circulation circuit is not ruled out in reactor plants with a pressurized water power reactor. These objects, moving in the coolant flow, can collide with the inner walls of the main circulation circuit, which can lead to equipment damage. Early detection of these objects will minimize damage and improve the safety of NPP operation. The reactor plant is equipped with a system for detecting loose/weakly fixed objects for this purpose. The main problem is a large number of false alarms arising from the registration of noise from the normal operation of the NPP. The paper considers the application of clustering algorithms to signals of the system for detecting loose/weakly fixed objects, which can significantly reduce the number of false alarms as it has been established that signals from the operation of standard equipment are highly repeatable. Then, having “trained” the system on a certain archive of data characterizing the regular functioning of the NPP, we can state that if the newly received signal falls into one of the clusters, then it reflects the normal functioning of the NPP, while the signals do not that fell into any of the clusters may be the result of the appearance of a loose / loosely fixed object, and this situation requires an immediate response from the personnel operating the NPP. This approach makes it possible to reduce the amount of the system for detecting loose/weakly fixed objects output information significantly, reduce the load on the operating personnel, improve the quality of decisions made and, accordingly, increase the safety of operation of the reactor plant as a whole.

In reactor plants with a water-water power reactor (VVER), free, weakly fixed and foreign objects may appear in the main circulation circuit, posing a threat to the integrity of the equipment and the safety of the reactor plant. For the purpose of early detection of these objects, the NPP is equipped with a system for detecting loose/weakly fixed objects (SOSP).In addition to the detection of loose/weakly fixed objects, the functions of the SOSP include the classification of registered events.The possibility of applying the classification algorithm is based on the fact that the signals from the operation of standard equipment are highly repeatable, even in the presence of noise, while a free object is characterized by a large stochastic component and its own deterministic class cannot be formed for it.Classification reduces the number of false alarms, allowing you to select signals from regular operations, while signals from one process must be assigned to one class.The idea of ​​the article is to "train" SOSP on a certain archive of data characterizing the normal functioning of the reactor plant, create a library of "base" classes and set the boundaries of each class so that, on the one hand, take into account the possible variability of signal parameters due to noise.Having defined the base classes, we can state that if a newly received signal falls into one of the classes, then it reflects the regular operation of the RI, while signals that do not fall into any of the classes may be the result of the appearance of a free/weakly fixed object.The article analyzes a lot of events accumulated in the archive of one of the existing SOSP.Their clustering was carried out, as a result of which the classes of events corresponding to regular technological operations were identified.For each class, the center of the class and the allowable limits of deviations from the center are calculated.All class centers obtained are benchmarks against which the SOSP either classifies a newly detected event in real time or characterizes it as "unclassified".