<p><span>Fin field-effect transistor (FinFET) based analog circuits are gaining importance over metal oxide semiconductor field effect transistor (MOSFET) based circuits with stability and high frequency operations. Comparator that forms the sub block of most of the analog circuits is designed using operational transconductance amplifier (OTA). The OTA is designed using new design procedures and the comparator circuit is designed integrating the sub circuits with OTA. The building blocks of the comparator design such as input level shifter, differential pair with cascode stage and class AB amplifier for output swing are designed and integrated. Folded cascode circuit is used in the feedback path to maintain the common mode input value to a constant, so that the differential pair amplifies the differential signal. The gain of the comparator is achieved to be greater than 100 dB, with phase margin of 65°, common mode rejection ratio (CMRR) of above 70 dB and output swing from rail to rail. The circuit provides unity gain bandwidth of 5 GHz and is suitable for high sampling rate data converter circuits.</span></p>

Successive Approximation Register (SAR) Analog to Digital Converter (ADC) architecture comprises of sub modules such as comparator, Digital to Analog Converter and SAR logic. Each of these modules imposes challenges as the signal makes transition from analog to digital and vice-versa. Design strategies for optimum design of circuits considering 22nm FinFET technology meeting area, timing, power requirements and ADC metrics is presented in this work. Operational Transconductance Amplifier (OTA) based comparator, 12-bit two stage segmented resistive string DAC architecture and low power SAR logic is designed and integrated to form the ADC architecture with maximum sampling rate of 1 GS/s. Circuit schematic is captured in Cadence environment with optimum geometrical parameters and performance metrics of the proposed ADC is evaluated in MATLAB environment. Differential Non Linearity and Integral Non Linearity metrics for the 12-bit ADC is limited to +1.15/-1 LSB and +1.22/-0.69 LSB respectively. ENOB of 10.1663 with SNR of 62.9613 dB is achieved for the designed ADC measured for conversion of input signal of 100 MHz with 20dB noise. ADC with sampling frequency upto 1 GSps is designed in this work with low power dissipation less than 10 mW.

Heating, ventilating, and air-conditioning (HVAC) systems consume a large amount of energy in residential houses and buildings. Effective energy management of HVAC is a cost-effective way to improve energy efficiency and reduce the energy cost of residential users. This work develops a novel distributed method for the residential transactive energy system that enables multiple users to interactively optimize their energy management of HVAC systems and behind-the-meter batteries. Specifically, this method effectively reduces the cost of smart homes by employing energy trading among users to leverage their power usage flexibility without compromising the users’ privacy. To achieve this goal, we design a distributed optimization algorithm based on the alternating direction method of multipliers (ADMM) to automatically operate the HVAC system and batteries, which minimizes the energy costs of users. Specifically, we decouple the optimization problem into a primal subproblem and a dual subproblem. The primal subproblem is solved by the users, and the dual subproblem is solved by the grid operator. Unlike the existing centralized method, our approach only uses the users’ private information locally for solving the primal subproblem hence preserves the users’ privacy. Using real-world data, we validate our proposed algorithm through extensive simulations in Matlab. The results demonstrate that our method effectively incentivizes the energy trading among the users to reduce users’ peak load and reduce the overall energy cost of the system by 23% on average.

Differential Amplifier is a primary building block of analog and mixed signal circuit for pre-processing and signal conditioning of analog signal. FINFET devices with high-k gate oxide at 22nm technology are predominantly used for high speed and low power complex VLSI circuits. FINFET based differential amplifiers are widely used in ADC’s and signal Processing applications due to their advantages in terms of power dissipation. Analog front end of complex VLSI circuits need to offer high gain, higher stability and low noise figure. Designing of FINFET based VLSI sub-circuits requires proper design procedure that can provide designers flexibility in controlling the circuit performances. In this paper, differential amplifier is designed using model parameters of high-k FINFET in 22nm technology. The conventional procedures for designing MOSFET based differential amplifier are modified for designing FINFET based differential amplifier. Schematic capture is carried out in Cadence environment and simulations are obtained considering 22nm FINFET PDK. The performance metrics are evaluated and optimized considering multiple iterations. The designed differential amplifier has slew rate of 6V/µSec and settling time of 0.9 µSec which is a desired metric for ADCs. Power Supply Rejection Ratio (PSRR) is 83 dB and dynamic range is 1.6754 V. Open loop DC gain of DA is achieved to be 103 dB with phase margin of 630 that demonstrates the advantages of DA designed in this work suitable for analog front end

No abstract