a b s t r a c tThis paper presents the analysis of the technical feasibility to use a photovoltaic system to supply the electrical demand on two referential commercial aircraft, Airbus A340-300 and Cessna Conquest 441. The methodology approach comprises a process given by the selection of the photovoltaic technology, the calculation of the available solar radiation, the determination of the electrical demand, the layout definition of solar cells, the photovoltaic system capacity calculation, the estimation of the photovoltaic system weight, the estimation of fuel savings for photovoltaic system equipped aircrafts, and finally, the extrapolation of results to other aircrafts. The study concludes that the use of photovoltaic technology to supply power to the aircraft electrical system can result viable from the point of view of operational profitability, generating savings in fuel consumption. These fuel savings depend on the type of aircraft, the flying route and schedules of operation.

The aeronautical industry is expanding after a period of economic turmoil. For this reason, a growing number of airports are facing capacity problems that can sometimes only be resolved by expanding infrastructure, with the inherent risks that such decisions create. In order to deal with uncertainty at different levels, it is necessary to have relevant tools during an expansion project or during the planning phases of new infrastructure. This article presents a methodology that combines simulation approaches with different description levels that complement each other when applied to the development of a new airport. The methodology is illustrated with an example that uses two models for an expansion project of an airport in The Netherlands. One model focuses on the operation of the airport from a high-level position, while the second focuses on other technical aspects of the operation that challenge the feasibility of the proposed configuration of the apron. The results show that by applying the methodology, analytical power is enhanced and the risk of making the wrong decisions is reduced. We identified the limitations that the future facility will have and the impact of the physical characteristics of the traffic that will operate in the airport. The methodology can be used for tackling different problems and studying particular performance indicators to help decision-makers take more informed decisions.

The purpose of this study is to analyze the concept of a hybrid apron with a fixed number of parking positions considering the management model influence for the average delay per aircraft and the gaseous emissions generated by aircraft and ground support equipment (GSE) altogether. The apron is studied based on two gate management models: in the first model, the aircraft are allocated in each gate due to operational factors only; in the second model, the rules of exclusive use of each gate according to the airline are included. The emissions generated by aircraft operations and that of their GSE (produced by the service and movements on the apron) are quantified and compared in the two gate management models: operation in the standard LTO cycle of the studied aircraft, GSE emissions have a similar relation with the compared gasses (NOx and CO), ranging between 1% and 3%. Further, if it compares the emissions between support vehicles and aircraft taking only into account the in-out taxiway, the relation between both CO sources shows similar values to those of the previous comparison, whereas NOx emissions produced by GSE reach an approximately 20%.The study considers different demand conditions obtained from the average day of the peak month of Aeroparque Jorge Newbery airport. Subsequently, through the SIMMOD PLUS software, the aircraft operations are simulated. The gates assignment and the arrival timetables are used as inputs for the GSE study due to an analytical model developed by us. Once the operational dimension is characterized and evaluated, the necessary data to quantify the gaseous emissions from the sources (Aircraft-GSE), based on the International Civil Aviation Organization (ICAO) guidelines, is obtained.