Building information modelling (BIM) is the first step towards the implementation of the industrial revolution 4.0, in which virtual reality and digital twins are key elements. At present, buildings are responsible for 40% of the energy consumption in Europe and, so, there is a growing interest in reducing their energy use. In this context, proper interoperability between BIM and building energy model (BEM) is paramount for integrating the digital world into the construction sector and, therefore, increasing competitiveness by saving costs. This paper evaluates whether there is an automated or semi-automated BIM to BEM workflow that could improve the building design process. For this purpose, a residential building and a warehouse are constructed using the same BIM authoring tool (Revit), where two open schemas were used: green building extensible markup language (gbXML) and industry foundation classes (IFC). These transfer files were imported into software compatible with the EnergyPlus engine—Design Builder, Open Studio, and CYPETHERM HE—in which simulations were performed. Our results showed that the energy models were built up to 7.50% smaller than in the BIM and with missing elements in their thermal envelope. Nevertheless, the materials were properly transferred to gbXML and IFC formats. Moreover, the simulation results revealed a huge difference in values between the models generated by the open schemas, in the range of 6 to 900 times. Overall, we conclude that there exists a semi-automated workflow from BIM to BEM which does not work well for big and complex buildings, as they present major problems when creating the energy model. Furthermore, most of the issues encountered in BEM were errors in the transfer of BIM data to gbXML and IFC files. Therefore, we emphasise the need to improve compatibility between BIM and model exchange formats by their developers, in order to promote BIM–BEM interoperability.

No abstract

Building retrofitting is an efficient means of reducing greenhouse gas emissions. Its first focus is on building façade, as transmission and air leakage are the main sources of energy loss in buildings. Nowadays, building modellers cannot easily implement envelope air leakage and assume constant values, which results in erroneous energy estimates. Additionally, in energy simulations, a weather file is usually inserted with measurements provided by a weather station. In this study, we revealed the use of wind data from the weather file (herein as global wind) to calculate the infiltration of a test case in Spain, using the three algebraic equations of EnergyPlus. Furthermore, four other wind data were applied: eastbound and westbound winds from the weather file and two from in situ measurements (on the southeast and on the northwest façades). The fifteen combinations of the three infiltration models and the five wind data were empirically evaluated, using the tracer gas results performed during three different periods. The combinations were validated according to the American Society for Testing Materials D5157 standard criteria, and the best and the only ones that complied with the standard were those using the wind data from the southeast in situ sensor and the west wind from the weather station. The global wind was not able to generate accurate infiltration models, which raises doubts about its use in the highly-time calibration of energy models. However, its disaggregation was a cost-effective strategy to estimate the infiltration of this case study.

No abstract

There is a growing interest in increasing the presence of renewable energy in the electric network. Photovoltaic production from grid-connected systems is leading this growth in terms of households. Alongside this development, concern about network security has emerged, because excesses of intermittent renewable energy on the grid could exceed voltage limits. Self-consumption, understood as the capacity of the producer to consume his or her own production, can partially solve these problems. Thermostatic controllable loads, such as heating and cooling, represent 50% of the total amount of energy consumed by buildings; the proper allocation of these loads could be a driving force for self-consumption. In this study, a demand side management strategy is proposed based on a building energy model equipped with an inverter heat pump coupled with a photovoltaic plant. The goal is to maximize the use of local energy from the photovoltaic plant (self-consumption), reducing the export and import of energy to and from the grid. This goal is achieved by optimizing the set-points in each room. An array of optimal set-points over six years is presented. The results show the capacity of the methodology to match similar values of self-consumption (70% in winter and 50% in summer) obtained by strategies based on chemical batteries. The findings are shown in an energy matching chart at different levels of detail (yearly and monthly). Color bubbles are added to the matching chart to help visualize the unmatched energy of the system graphically. In comparison with actual model predictive control technologies, this study’s strategy offers great simplicity and a large saving in computational time.