The problem of position tracking of a mini drone subject to wind perturbations is investigated. The solution is based on a detailed unmanned aerial vehicle (UAV) model, with aerodynamic coefficients and external disturbance components, which is introduced in order to better represent the impact of the wind field. Then, upper bounds of wind-induced disturbances are characterized, which allow a sliding mode control (SMC) technique to be applied with guaranteed convergence properties. The peculiarity of the considered case is that the disturbance upper bounds depend on the control amplitude itself (i.e. the system is nonlinear in control), which leads to a new procedure for the control tuning presented in the paper. The last part of the paper is dedicated to the analysis and reduction of chattering effects, as well as investigation of rotor dynamics issues. Conventional SMC with constant gains, proposed first order SMC, and proposed quasi-continuous SMC are compared. Nonlinear UAV simulator, validated through indoor experiments, is used to demonstrate the effectiveness of the proposed controls.

In the context of safe control of quadrotors, wind velocity estimation and compensation have a key-role. For this reason, assuming the lack of airspeed sensors and considering sensors noise, in this paper three time-varying parameter estimation algorithms are introduced, studied and merged to estimate the varying wind velocity, using only on-board quadrotor sensors and an inertial tracking position system (e.g. Optitrack camera, GPS). To this end, a detailed quadrotor flight dynamics model is presented using identified aerodynamic coefficients and wind velocity components along the three axes. Then, a decomposition of dynamical equations is performed in known and unknown terms to be estimated. Thanks to this decomposition, the estimation algorithms are built and finally tested and validated in numerical experiments, against the introduced sensors' noise.

Lane-keeping assistance design for road vehicles is a multi-objective design problem that needs to simultaneously maintain lane tracking, ensure driver comfort, provide vehicle stability, and minimize conflict between the driver and the autonomous controller. In this work, a cooperative control strategy is proposed for lane-keeping keeping by integrating driving monitoring, variable level of assistance allocation, and human-in-the-loop control. In the first stage, a time-varying physical driver loading pattern is identified based on a relationship between lateral acceleration, road curvature, and the measured maximum driver torque. Together with the monitored driver state that indicates driver mental loading, an adaptive driver activity function is then formulated that replicates the levels of assistance required for the driver in the next stage. To smoothly transition authority between various modes (from manual to autonomous and vice versa) based on the generated levels of assistance, a novel higher-order sliding mode controller is proposed and closed-loop stability is established. Further, a novel sharing parameter (which is proportional to the torques coming from the driver and from the autonomous controller) is used to minimize the conflict. Experimental results on the SHERPA high-fidelity vehicle simulator show the real-time implementation feasibility. Extensive experimental results provided on the Satory test track show improvement in cooperative driving quality by 9.4%, reduction in steering workload by 86.13%, and reduced conflict by 65.38% when compared with the existing design (no sharing parameter). These results on the cooperative performance highlight the significance of the proposed controller for various road transportation challenges.