By applying a seed-mediated growth method that had been reported for the chemical synthesis of Ag nanorods and nanowires in aqueous solution, we successfully attached Ag nanosphere and nanorod particles to indium tin oxide (ITO) surfaces. In this method, it is characteristic that the attachment can be performed without using bridging reagents, such as 3-mercaptopropyltrimethoxysilane, but rather through a two-step immersion into the seed solution first and then into the growth solution containing AgNO(3), cetyltrimethylammonium bromide, and ascorbic acid. It was found that the formed nanostructures were very sensitive to the amount of ascorbic acid in the growth solution. Whereas Ag nanoparticles grew on the ITO surface with a moderate dispersion when the concentration of ascorbic acid in the growth solution was 0.64 mM, the formation of nanorods and nanowires was observed when the ascorbic acid concentration was increased to 0.86 mM. The attachment of Ag nanoparticles onto the ITO surfaces was strong enough for further use, e.g., as a working electrode. From electrochemical measurements, it was confirmed that the outer spheres of the Ag nanoparticles involved in the redox reaction show the typical oxidation and reduction waves of Ag. In addition, the redox behavior of [Fe(CN)(6)](3-)/[Fe(CN)(6)](4-) was improved on the Ag-nanoparticle-attached ITO (AgNP/ITO) electrode, reflecting the low electron-transfer resistivity, which is a remarkable advantage of the present fabrication without using bridging reagents. This result indicated that the Ag nanoparticles promote the electron-transfer reactions by being present on the conducting ITO surface. The AgNP/ITO electrode was examined for the reduction of the methyl viologen dication in order to discuss some features of the present fabrication.

The homojunction of oxygen/metal vacancies and its interfacial n-p effect on the physiochemical properties are rarely reported. Interfacial n-p homojunctions of TiO are fabricated by directly decorating interfacial p-type titanium-defected TiO around n-type oxygen-defected TiO nanocrystals in amorphous-anatase homogeneous nanostructures. Experimental measurements and theoretical calculations on the cell lattice parameters show that the homojunction of oxygen and titanium vacancies changes the charge density of TiO ; a strong EPR signal caused by oxygen vacancies and an unreported strong titanium vacancies signal of 2D H TQ-SQ MAS NMR are present. Amorphous-anatase TiO shows significant performance regarding the photogeneration current, photocatalysis, and energy storage, owing to interfacial n-type to p-type conductivity with high charge mobility and less structural confinement of amorphous clusters. A new "homojunction of oxygen and titanium vacancies" concept, characteristics, and mechanism are proposed at an atomic-/nanoscale to clarify the generation of oxygen vacancies and titanium vacancies as well as the interface electron transfer.

No abstract

Platinum nanoparticles directly attached to indium tin oxide (PtNP/ITO) were successfully fabricated by using an in situ chemical reductive growth method. In this method, PtNPs could be grown on the ITO surface via the one-step immersion into the growth solution containing PtCl4(2-) and ascorbic acid. The attached and grown PtNPs were spherical having an agglomerated nanostructure composed of small nanoclusters. From the morphological changes depending on the growth time, which were observed with an FE-SEM, PtNPs were found to be grown via the progressive nucleation mechanism. As the characteristics of the PtNP/ITO were those of a working electrode, it was found that the charge transfer resisivity was significantly lowered due to the grown PtNPs. Hence, for a typical redox system of [Fe(CN)6]3-/[Fe(CN)6]4-, the PtNP/ITO electrode exhibited the electrochemical responses similar to those of the bulk Pt electrode. Furthermore, it was clarified that the PtNP/ITO electrode had significant electrocatalytic properties for the oxygen reduction and methanol oxidation. The present PtNPs that had the agglomerated nanostructure may be promising for a new type of electrode material.

No abstract