In the work, a facile yet effi cient self-sacrifi ce strategy is smartly developed to scalably fabricate hierarchical mesoporous bi-component-active ZnO/ ZnFe 2 O 4 (ZZFO) sub-microcubes (SMCs) by calcination of single-resource Prussian blue analogue of Zn 3 [Fe(CN) 6 ] 2 cubes. The hybrid ZZFO SCMs are homogeneously constructed from well-dispersed nanocrstalline ZnO and ZnFe 2 O 4 (ZFO) subunites at the nanoscale. After selectively etching of ZnO nanodomains from the hybrid, porously assembled ZFO SMCs with integrate architecture are obtained accordingly. When evaluated as anodes for LIBs, both hybrid ZZFO and ZFO samples exhibit appealing electrochemical performance. However, the as-synthesized ZZFO SMCs demonstrate even better electrochemical Li-storage performance, including even larger initial discharge capacity and reversible capacity, higher rate behavior and better cycling performance, particularly at high rates, compared with the single ZFO, which should be attributed to its unique microstructure characteristics and striking synergistic effect between the bi-component-active, well-dispersed ZnO and ZFO nanophases. Of great signifi cance, light is shed upon the insights into the correlation between the electrochemical Li-storage property and the structure/component of the hybrid ZZFO SMCs, thus, it is strongly envisioned that the elegant design concept of the hybrid holds great promise for the effi cient synthesis of advanced yet low-cost anodes for next-generation rechargeable Li-ion batteries.

Flexible energy storage devices are critical components for emerging flexible and wearable electronics. Improving the electrochemical performance of flexible energy storage devices depends largely on development of novel electrode architectures and new systems. Here, a new class of flexible energy storage device called flexible sodium‐ion pseudocapacitors is developed based on 3D‐flexible Na2Ti3O7 nanosheet arrays/carbon textiles (NTO/CT) as anode and flexible reduced graphene oxide film (GFs) as cathode without metal current collectors or conducting additives. The NTO/CT anode with advanced electrode architectures is fabricated by directly growing Na2Ti3O7 nanosheet arrays on carbon textiles with robust adhesion through a simple hydrothermal process. The flexible GF//NTO/CT configuration achieves a high energy density of 55 Wh kg−1 and high power density of 3000 W kg−1. Taking the fully packaged flexible sodium‐ion pseudocapacitors into consideration, the maximum practical volumetric energy density and power density reach up to 1.3 mWh cm−3 and 70 mW cm−3, respectively. In addition, the flexible GF//NTO/CT device demonstrates a stable electrochemical performances with almost 100% capacitance retention under harsh mechanical deformation.

A new solvothermal strategy combined with calcination has been developed to synthesize NaTi2(PO4)3-graphene nanocomposites. X-ray diffraction, thermogravimetric analysis, field-emission scanning electron microscopy and transmission electron microscopy were performed to characterize their microstructures and morphologies. It was found that NASICON-type structured NaTi2(PO4)3 nanoparticles with highly crystallinity were homogeneously anchored on the surface of conducting graphene nanosheets, forming a two-dimensional hybrid nanoarchitecture. A possible growth mechanism was also discussed based on time-dependent experiments. When used as anode materials for Na-ion batteries, the nanocomposites exhibited excellent electrochemical performance with high-rate capability and excellent cycling stability in 1 M Na2SO4 aqueous electrolyte. The electrode delivered high specific capacities of 110, 85, 65, 40 mA h g(-1) at 2, 5, 10 and 20 C, respectively, and still retained 90% of the initial capacity after 100 cycles at 2 C.