No abstract

Incorporating thermal energy storage (TES) into a concentrating solar power (CSP) system extends the power production hours, eliminating intermittency and reducing the Levelized Cost of the Energy (LCOE). The designed TES system was integrated with a 3 kW free-piston Stirling convertor. A NaF-NaCl eutectic salt was chosen as the phase change material (PCM) with a melting temperature of 680 • C. This eutectic salt has an energy density that is 5 to 10 times that of a typical molten salt PCM. In order to overcome the drawbacks of the material having a low thermal conductivity, heat pipes were embedded into the PCM to enhance the heat transfer rate within the system. Since the dish collector tracks the sun over the course of the day, two operational extremes were tested on the system; horizontal (zero solar elevation at sunrise/sunset) and vertical (solar noon). Although the system's performance was below the expectations due to improperly sized wicks in the secondary heat pipes, the results indicated that the Stirling engine was able to produce 1.3 kWh of electricity by extracting latent heat energy from the PCM; thus, the concept of the design was validated.

No abstract

No abstract

The demand for a reliable energy supply has promoted the development of the Marcellus Shale gas industry in the past few years. However, the produced water from hydraulic fracturing (also known as fracking) poses a hazard to human and environmental health because of its dissolved solid, hydrocarbon, and heavy metal content. This research proposes to develop a portable solar power assisted water distiller which can process produced water on-site for natural gas wells.