In offshore oil wells it is very common to perform seawater injection through injection wells for hydrocarbon recovery. When seawater, rich in sulfate ion, mixes with formation water, whose composition can contain divalent cations such as barium and calcium, it often leads to sulfate salts formation due to their chemical incompatibility. These salts can cause serious damage in production wells. The barium sulfate (BaSO 4) is the most problematic scale and may cause many complications. In order to solve this issue, polycarboxylic acids, such as diethylene triamine pentaacetic acid, are used. Thus, the primary focus of this work was to develop an experimental procedure to study the BaSO 4 dissolution. Initially, through static tests to understand the relationship between dissolver concentration, temperature and dissolution time, and then through dynamic tests in sandstone reservoirs. Based on the results obtained, in the static tests the best condition for barite to dissolve was at high temperatures (80 ºC) and contact time of 48 hours, since from 50 °C there is an increase in dissolution rate, associated with a long contact time between dissolver and barite. In the dynamic tests, after scale formation, barite could be removed, but the high DTPA concentration should be avoided.

The presence of acidic compounds as naphthenic acids in crude oil causes several problems for the petroleum industry, including corrosion in both upstream and downstream production processes. Based on this scenario, the main objective of this work was to investigate the removal of the acidic compound from two Brazilian heavy oils by adsorption processes using six potential adsorbents: powdered shale, activated carbon, bentonite, silica gel, powdered sandstone and powdered wood. These raw materials were previously characterized by conventional and surface analysis techniques, which show that they offer a good surface area and thermal stability. To evaluate the removal efficiency at the molecular level, the crude oil samples and the filtered oils were analyzed by negative electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry [ESI (-) FTICR MS]. The O 2 class, which is related to the relatively high acidity of the samples, was the most abundant in both crude oil samples, moreover, this class was more retained by adsorbents. Silica gel, activated carbon and bentonite were the best adsorbents of acidic compounds from the tested oils, in agreement with their markedly higher surface area and porous volume. Additionally, a chromatographic analysis was performed and showed no changes in the oil profile.

Direitos para esta edição cedidos à Atena Editora pelos autores. Open access publication by Atena Editora Todo o conteúdo deste livro está licenciado sob uma Licença de Atribuição Creative Commons. Atribuição-Não-Comercial-NãoDerivativos 4.0 Internacional (CC BY-NC-ND 4.0). O conteúdo dos artigos e seus dados em sua forma, correção e confiabilidade são de responsabilidade exclusiva dos autores, inclusive não representam necessariamente a posição oficial da Atena Editora. Permitido o download da obra e o compartilhamento desde que sejam atribuídos créditos aos autores, mas sem a possibilidade de alterá-la de nenhuma forma ou utilizá-la para fins comerciais.Todos os manuscritos foram previamente submetidos à avaliação cega pelos pares, membros do Conselho Editorial desta Editora, tendo sido aprovados para a publicação com base em critérios de neutralidade e imparcialidade acadêmica.A Atena Editora é comprometida em garantir a integridade editorial em todas as etapas do processo de publicação, evitando plágio, dados ou resultados fraudulentos e impedindo que interesses financeiros comprometam os padrões éticos da publicação. Situações suspeitas de má conduta científica serão investigadas sob o mais alto padrão de rigor acadêmico e ético.