We experimentally demonstrated that paramylon, a storage polysaccharide of Euglena gracilis, is efficiently thermoplasticized by adding acyl groups that differ in alkyl chain length. Glass transition temperature of mixed paramylon esters was higher than those of plant-based polylactic acid (PLA), poly 11-aminoundecanoic acid (PA11), and petroleum-based acrylonitrile-butadiene-styrene (ABS) resin and was comparable to that of cellulose acetate stearate (CAS). Their thermoplasticity was equivalent to or higher than those of these reference plastics. The bending strength and bending elastic modulus of injection molded test specimens made from mixed paramylon esters were comparable to those of the reference plastics. While their impact strength was lower than that of specimens made from ABS resin and CAS, it was comparable to those of PLA and PA11. Euglenoid β-1,3-glucans are thus a potential component of thermoplastic materials.

No abstract

No abstract

Mixed paramylon esters prepared from paramylon (a storage polysaccharide of Euglena), acetic acid, and a long-chain fatty acid by one-pot synthesis using trifluoroacetic anhydride as a promoter and solvent were shown to have thermoplasticity. Size exclusion chromatography indicated that the mixed paramylon esters had a weight average molecular weight of approximately 4.9-6.7×10(5). Thermal analysis showed that these esters were stable in terms of the glass transition temperature (>90°C) and 5% weight loss temperature (>320°C). The degree of substitution of the long alkyl chain group, a dominant factor determining thermoplasticity, was controlled by tuning the feed molar ratio of acetic acid and long-chain fatty acid to paramylon. These results implied that the one-pot synthesis is useful for preparing structurally-well defined thermoplastic mixed paramylon esters with high molecular weight.

No abstract