The stability of lycopene in an olive oil/tomato emulsion during thermal processing (80-140 °C) was studied. Initially, the degradation of total lycopene (all-E plus Z-forms) occurred quickly at temperatures above 100 °C. However, a nonzero plateau value, depending on the processing temperature, was attained after longer treatment times. Besides degradation, the isomerization of total-Z-lycopene as well as the individual isomerization of all-E-, 5-Z-, 9-Z-, and 13-Z-lycopene was studied in detail. After prolonged heating, the isomer conversion reached a temperature-dependent equilibrium state. The degradation of total lycopene and the isomerization could be described by a fractional conversion model. The temperature dependency of the corresponding reaction rate constants was quantified by the Arrhenius equation. The activation energy of degradation was estimated to be 28 kJ/mol, and the activation energy of overall (all-E and total-Z) isomerization was estimated to be 52 kJ/mol.

The aim of this study was to explore influence of evaporative cooling (EC), pre-storage disinfection treatments and maturity stage at harvest on postharvest quality of tomato fruit. The tomato samples ( Mill. cv. Nemonetta) were harvested, stored for 28 days and data were collected every seven days. The pH, total titratable acidity (TTA), total soluble solids (TSS), firmness, colour, weight loss (PWL) and marketability percentage were analysed. The temperature difference between ambient storage and EC at the fan varied between 4 and 7 °C, the relative humidity (RH) varied between 31 and 86%, while at different locations inside the EC it varied between 2-3 °C and 5-8%, respectively. Maturity had significant influence on the overall quality of tomatoes. The pH value of green, pink and red tomato was 4.86 and 5.03. The TTA content, the TSS content significantly affected over the 14 days of storage. TSS:TA was found to be in the range of 7.8-33.9. The EC storage shows a higher firmness and hue angle, when compared to the ambient conditions stored tomatoes. Compared to ambient storage, EC storage reduced the PWL by 7-10% over 30 days, while ambient storage took 15 days. EC storage and pre-storage treatments improved the shelf-life and marketability of tomatoes. However, variation in temperature and RH inside EC could affect the storability of the produce.

The environment and food safety are major areas of concern influencing the development of biodegradable packaging for partial replacement of petrochemical-based polymers. This review is aimed at updating the recent advances in biodegradable packaging material and the role of virtual technology and nanotechnology in the tomato supply chain. Some of the common biodegradable materials are gelatin, starch, chitosan, cellulose, and polylactic acid. The tensile strength, tear resistance, permeability, degradability, and solubility are some of the properties defining the selection and utilization of food packaging materials. Biodegradable films can be degraded in soil by microbial enzymatic actions and bioassimilation. Nanoparticles are incorporated into blended films to improve the performance of packaging materials. The prospects of the fourth industrial revolution can be realized with the use of virtual platforms such as sensor systems in authentification and traceability of food and packaging products. There is a research gap on the development of a hybrid sensor system unit that can integrate sampling headspace (SHS), detection unit, and data processing of big data for heterogeneous tomato-derived volatiles. Principal component analysis (PCA), linear discriminant analysis (LDA), and artificial neutral network (ANN) are some of the common mathematical models for data interpretation of sensor systems.

No abstract