In situ XRD and IR optical measurements demonstrate the coexistence of M1 and R phases during the SMT transition of VO2 thin films.

We experimentally investigated the infrared properties of a set of steel textiles, prepared using different type of fabrics. Infrared emission of the textiles was characterized in the mid-infrared range, i.e. 8÷14 μm, by observing their temperature evolution under heating regime with a focal plane array (FPA) infrared camera. Standard test method for measuring and compensating emissivity using infrared imaging radiometers was applied to the set of metallic textiles. The obtained experimental results allowed to retrieve the infrared emissivity at different applied temperatures. Although their infrared emission show some differences depending on the specific fabric, all the investigated textiles composed of steel yarns appear to be suitable for thermal shielding applications. Finally, the measured data were interpreted by means of the finite-difference time-domain (FDTD) numerical simulations as well as using Plank's theory of black-body radiation

Great attention has been recently paid to transparent conductive oxides (TCOs) due to their application in optoelectronic devices, flat panel displays, solar cells, and anti-static coatings. Concerning photovoltaic applications, the reduction of the material and processing costs are the key factors in the production process. Due to In scarcity and cost, alternative solutions to indium tin oxide (ITO) are needed. Al-doped ZnO (AZO) meets the requirements for application in thin film solar cells, thanks to its good optoelectrical properties, low cost and higher resistance to Hydrogen-reach plasmas. Recently many papers analyze innovative AZO based TCO structures where a thin layer of Silver is introduced in the TCO so to increase the electrical conductivity without loosing transparency. In this work we study the transparency and the electrical sheet resistance of a multilayer AZO/Ag/AZO as a function of the silver thin layer, and discuss the problem of optimizing the thicknesses of the multilayers to get the best performances. We have realized an AZO/Ag/AZO multilayer coating by radio frequency (RF) sputtering with an optimal thickness of the silver layer. Optical and photoacoustic spectroscopy (PAS) have been applied to perform the characterization of the sample. In particular PAS seems the most efficient technique to test directly the absorbance of the structure which should be reduced to avoid overheating and loss of the solar cell efficiency

No abstract