A high reliability and high thermal performance molding flip chip ball grid arrays structure which was improved from Terminator FCBGA®. (The structure are shown as Fig. 1) It has many advantages, like better coplanarity, high through put (multi pes for each shut of molding process), low stress, and high thermal performance. In conventional flip chip structure, underfill dispenses and cure processes are a bottleneck due to low through put (dispensing unit by unit). For the high performance demand, large package/die size with more integrated functions needs to meet reliability criteria. Low k dielectric material, lead free bump especially and the package coplanarity are also challenges for package development. Besides, thermal performance is also a key concern with high power device. From simulation and reliability data, this new structure can provide strong bump protection and reach high reliability performance and can be applied for low-K chip and all kind of bump composition such as tin-lead, high lead, and lead free. Comparing to original Terminator FCBGA®, this structure has better thermal performance because the thermal adhesive was added between die and heat spreader instead of epoxy molding compound (EMC). The thermal adhesive has much better thermal conductivity than EMC. Furthermore, this paper also describes the process and reliability validation result.