Concrete structures deteriorate for various reasons and upgrading is needed to ensure their continued safe working conditions. Retrofitting reinforced concrete (RC) beams have been accomplished using various techniques, namely, steel plates, external posttensioning, externally bonded fiber-reinforced polymer (FRP), and near-surface-mounted FRP systems to increase flexural and shear capacity. The objective of this paper is to investigate the feasibility of fabric-reinforced cementitious-matrix (FRCM) materials as an alternative external strengthening technique for RC members. The FRCM is a composite material consisting of one or more layers of cement-based matrix reinforced with dry-fiber fabric. The experimental program consists of testing 18 RC beams strengthened in flexure with two different FRCM schemes (one and four reinforcement fabrics). An analysis and design are conducted following the well-established formulation to calculate the flexural capacity of the beams and compare their results with the experimental database

The repair and retrofit/rehabilitation of existing concrete and masonry structures have traditionally been accomplished with externally bonded fiber-reinforced polymer (FRP) systems, steel plates, reinforced concrete (RC) overlays, and posttensioning, just to name some of the many techniques presently available. Fabric-reinforced cementitious-matrix (FRCM) composites have recently emerged as an additional strengthening technology. FRCM is a composite material consisting of a sequence of one or more layers of cement-based matrix reinforced with dry-fiber fabric. This paper has three objectives: (1) to review existing guidelines for tensile testing and calculation of FRCM material properties to be used in analysis; (2) to report on some of the results of an experimental program intended to characterize the tensile behavior of FRCM coupons; and (3) to discuss the performance and analysis of concrete RC slab-type elements strengthened with FRCM. The laboratory results demonstrate the technical viability of this new composite material system for strengthening flexural RC members

The interest in retrofit/rehabilitation of existing concrete structures has increased due to degradation and/or introduction of more stringent design requirements. Among the externally-bonded strengthening systems fiber-reinforced polymers is the most widely known technology. Despite its effectiveness as a material system, the presence of an organic binder has some drawbacks that could be addressed by using in its place a cementitious binder as in fabric-reinforced cementitious matrix (FRCM) systems. The purpose of this paper is to evaluate the behavior of reinforced concrete (RC) beams strengthened in shear with U-wraps made of FRCM. An extensive experimental program was undertaken in order to understand and characterize this composite when used as a strengthening system. The laboratory results demonstrate the technical viability of FRCM for shear strengthening of RC beams. Based on the experimental and analytical results, FRCM increases shear strength but not proportionally to the number of fabric plies installed. On the other hand, FRCM failure modes are related with a high consistency to the amount of external reinforcement applied. Design considerations based on the algorithms proposed by ACI guidelines are also provided

No abstract

The development of techniques capable of evaluating the deterioration of reinforced concrete structures is instrumental to the advancement of structural health monitoring (SHM) techniques and service life estimate methodologies for constructed facilities. One of the main causes of degradation is the corrosion of steel reinforcement. This process can be modeled phenomenologically, whereas laboratory tests aimed at studying durability responses are typically accelerated to provide usable results within a realistic period of time. Numerous nondestructive methods have been recently studied. Acoustic emission (AE) is emerging as a nondestructive tool to detect the onset and progression of deterioration mechanisms associated with concrete cracking. In this paper, an accelerated corrosion and continuous AE monitoring test setup is presented, providing relevant information on the characteristics of the corrosion circuit, continuous measurement procedure, selection of AE sensors, and AE parameter setting for data acquisition. The effectiveness of AE in detecting and characterizing the initiation of the corrosion process is discussed on the basis of results from small-scale, precracked RC specimens that are representative of areas near the clear cover in typical RC members. The main outcome is a new approach of AE data interpretation based on time-driven parameters