Objective: To evaluate the force extension relaxation of different manufacturers and diameters of latex elastics subjected to static tensile testing under dry and wet conditions. Materials and Methods: Sample sizes of 15 elastics from American Orthodontics (AO) (Sheboygan, Wis), TP (La Porte, Ind), and Morelli Orthodontics (Sorocaba SP, Brazil) were used. Equivalent medium force products were tested-3/16, 1/4, and 5/16 inch lumen size from each manufacturer-making a total of 1080 specimens. An apparatus was designed to simulate oral environments during elastics stretching. Forces were read after 1, 3, 6, 12, and 24 hour periods using the Emic Testing Machine (Emic Co., Sao Paulo, Brazil) with 30 mm/min cross-head speed and load cell of 20 N (Emic Co). Kruskal-Wallis and Dunn's tests were used to identify statistical significance. Results: Statistical differences between AO and the other brands were noted for all testing times. Significant variation in mechanical properties was observed in latex elastics from Morelli. Relationships among loads at the 0 hour time period were as follows: Morelli.AO.TP for 3/16 elastics (P 5 .0016), 1/4 elastics (P 5 .0016), and 5/16 elastics (P 5 .0087). Conclusion: Significant differences in force extension relaxation were noted for elastics from these manufacturers. Force relaxation over the 24 hour time period was AO.Morelli.TP for 3/16 elastics, AO.TP.Morelli for 1/4 elastics, and TP.AO.Morelli for 5/16 elastics. The force decay pattern showed a notable drop-off of forces during 0 to 3 hours, a slight increase in force values from 3 to 6 hours, and a progressive force reduction over 6 to 24 hours. (Angle Orthod. 2011;81:812-819.)