This paper describes a calibration procedure for the double structure constitutive model ICDSM (Imperial College Double Structure Model), developed for highly expansive clays, when the model is applied to MX-80 bentonite. Firstly, the model calibration process is discussed and organised in a number of hierarchical steps. These steps involve the estimation of the macrostructural parameters that can be derived from oedometer, isotropic and triaxial laboratory data. Estimation of the microstructural parameters is more challenging due to the limited knowledge of an expansive clay’s fabric and of the physico-chemical phenomena that control its evolution upon wetting. Nevertheless, this paper discusses the available sources of data and identifies the appropriate information that is needed to characterise the micro-structural behaviour of the bentonite. Finally, through the simulation of a swelling pressure test on a bentonite plug, the hydration of the material is studied as a hydro-mechanical coupled process. Particular attention is devoted to the evolution of the stress state of the sample, which is compared to the experimental measurements in order to demonstrate that the constitutive model accurately reproduces the expansive behaviour of MX-80 bentonite.

No abstract

Buffer materials for nuclear waste disposal applications generally consist of blocks made of highly expansive compacted clay. However, high-density pellets of bentonite are being evaluated as an alternative buffer material for waste isolation. The material response of pellet-based buffers may be quite different from that of compacted buffers, because of the peculiar discontinuous porosity presented. An overview of the literature available on pellet-based buffers is presented and, in particular, two main topics are discussed: firstly, the characteristics of the fabric of the pellets that can be observed through techniques of micro-structural investigation, secondly, the most important behavioural features that can be seen during material testing. Additionally, the constitutive frameworks that have already been developed specifically for pellets are also reviewed. The overall objective of the paper is to highlight the differences between compacted and pellet-based bentonite buffers, in order to propose suitable assumptions to start developing a constitutive model for the latter.