No abstract

The growing production and use of electric and electronic components has led to higher rates of metal consumption and waste generation. To solve this double criticality, the old linear management method (in which a product becomes waste to dispose), has evolved towards a circular approach. Printed circuit boards (PCBs) are the brains of many electronic devices. At the end of their life, this equipment represents a valuable scrap for the content of base metals such as Cu and Zn (25 and 2 wt %, respectively) and precious metals such as Au, Ag, and Pd (250, 1000, and 110 ppm, respectively). Recently, biotechnological approaches have gained increasing prominence in PCB exploitation since they can be more cost-efficient and environmentally friendly than the chemical techniques. In this context, the present paper describes a sustainable process which uses the fungal strain Aspergillus niger for Cu and Zn extraction from PCBs. The best conditions identified were PCB addition after 14 days, Fe3+ as oxidant agent, and a pulp density of 2.5% (w/v). Extraction efficiencies of 60% and 40% for Cu and Zn, respectively, were achieved after 21 days of fermentation. The ecodesign of the process was further enhanced by using milk whey as substrate for the fungal growth and the consequent citric acid production, which was selected as a bioleaching agent.

No abstract

The work presented here focused on the extraction of gold (Au), silver (Ag) and palladium (Pd) from electronic waste using a solution of ammonium thiosulfate. Thiosulfate was used as a valid alternative to cyanide for precious metal extractions, due to its non-toxicity and high selectivity. The interactions between sodium thiosulfate, total ammonia/ammonium, precious metal concentrations and the particle size of the waste printed circuit boards (WPCBs) were studied by the response surface methodology (RSM) and the principal component analysis (PCA) to maximize precious metal mobilization. Au extraction reached a high efficiency with a granulometry of less than 0.25 mm, but the consumption of reagents was high. On the other hand, Ag extraction depended neither on thiosulfate/ammonia concentration nor granulometry of WPCBs and it showed efficiency of 90% also with the biggest particle size (0.50 < Ø < 1.00 mm). Pd extraction, similarly to Au, showed the best efficiency with the smallest and the medium WPCB sizes, but required less reagents compared to Au. The results showed that precious metal leaching is a complex process (mainly for Au, which requires more severe conditions in order to achieve high extraction efficiencies) correlated with reagent concentrations, precious metal concentrations and WPCB particle sizes. These results have great potentiality, suggesting the possibility of a more selective recovery of precious metals based on the different granulometry of the WPCBs. Furthermore, the high extraction efficiencies obtained for all the metals bode well in the perspective of large-scale applications.