Angle-resolved light scattering techniques are powerful tools to obtain structural and spectroscopic information on the investigated sample by means of the study of the pattern of the angular distribution of scattered light. In this paper, we show the details of a new electronic system conceived to automate a Raman coherent backscattering setup, in which it is crucial to acquire several spectra at different angles in a wide spectral acquisition range. In this frame, we used this electrical circuit to trigger the signal edges between the charged-coupled device and the motorized nanorotator stage in our setup, carrying out a considerable quantity of measurements only with an initial input given by the operator and minimizing the supervision of the experiment and, therefore, the time invested by the user in it. By means of this system that can be easily integrated in the setup, we can perform distinct type of measurements by using different configurations of the components that make up the experimental setup.

Recently, acoustic tweezers based on an array of ultrasonic transducers have been reported taking inspiration from holographic optical tweezers. In the latter technique, the calibration of the optical trap is an essential procedure to obtain the trap stiffnesses. On the contrary, in the case of acoustic tweezers the calibration of the acoustic forces is seldom carried out. To cover this gap, in this work we adapt the calibration protocols employed in optical tweezers to acoustic tweezers based on arrays of ultrasonic transducers. We measure trap stiffnesses in the mN/m range that are consistent with theoretical estimates obtained by calculations of the acoustic radiation forces based on the Gor'kov potential. This work gives a common framework to the optical and acoustic manipulation communities, paving the way to a consistent calibration of hybrid acousto-optical setups.