This paper describes the development of a legged robot designed for general locomotion of complex terrain but specialized for dynamical, high-speed climbing of a uniformly convex cylindrical structure, such as an outdoor telephone pole. This robot, the RiSE V3 climbing machine-mass 5.4 kg, length 70 cm, excluding a 28 cm tail appendage-includes several novel mechanical features, including novel linkage designs for its legs and a non-backdrivable, energy-dense power transmission to enable high-speed climbing. We summarize the robot's design and document a climbing behavior that achieves rapid ascent of a wooden telephone pole at 21 cm/s, a speed previously unachieved-and, we believe, heretofore impossible-with a robot of this scale. The behavioral gait of the robot employs the mechanical design to propel the body forward while passively maintaining yaw, pitch, and roll stability during climbing locomotion. The robot's general-purpose legged design coupled with its specialized ability to quickly gain elevation and park at a vertical station silently with minimal energy consumption suggest potential applications including search and surveillance operations as well as ad hoc networking. Reprinted from Proceedings of the IEEE International Conference on Robotics and Automation 2009 (ICRA 2009)This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of the University of Pennsylvania's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to pubs-permissions@ieee.org. By choosing to view this document, you agree to all provisions of the copyright laws protecting it. Abstract-This paper describes the development of a legged robot designed for general locomotion of complex terrain but specialized for dynamical, high-speed climbing of a uniformly convex cylindrical structure, such as an outdoor telephone pole. This robot, the RiSE V3 climbing machine-mass 5.4 kg, length 70 cm, excluding a 28 cm tail appendage-includes several novel mechanical features, including novel linkage designs for its legs and a non-backdrivable, energy-dense power transmission to enable high-speed climbing. We summarize the robot's design and document a climbing behavior that achieves rapid ascent of a wooden telephone pole at 21 cm/s, a speed previously unachieved-and, we believe, heretofore impossible-with a robot of this scale. The behavioral gait of the robot employs the mechanical design to propel the body forward while passively maintaining yaw, pitch, and roll stability during climbing locomotion. The robot's general-purpose legged design coupled with its specialized ability to quickly gain elevation and park at a vertical station silently with minimal energy consumption suggest potential applications including search and surveilla...

This paper describes the inspiration for, design, analysis, and implementation of, and experimentation with the first dynamical vertical climbing robot. Biologists have proposed a pendulous climbing model that abstracts remarkable similarities in dynamical wall scaling behavior exhibited by radically different animal species. We numerically study a version of that pendulous climbing template dynamically scaled for applicability to utilitarian payloads with conventional electronics and actuation. This simulation study reveals that the incorporation of passive compliance can compensate for the scaled model's poorer power density and scale disadvantages relative to biology. However, the introduction of additional dynamical elements raises new concerns about stability regarding both the power stroke and limb coordination schemes that we allay via mathematical analysis of further simplified models. Combining these numerical and analytical insights into a series of design prototypes, we document the correspondence of the various models to the scaled platforms and report that our final prototype climbs dynamically at vertical speeds up to 0.67 m/s (1.5 body-lengths per second, in rough agreement with our models' predictions).

Abstract-This paper reviews a template for dynamical climbing originating in biology, explores its stability properties in a numerical model, and presents empirical data from a physical prototype as evidence of the feasibility of adapting the dynamics of the template to robot that runs vertically upward.The recently proposed pendulous climbing model abstracts remarkable similarities in dynamic wall scaling behavior exhibited by radically different animal species. The present paper's first contribution summarizes a numerical study of this model to hypothesize that these animals' apparently wasteful commitments to lateral oscillations may be justified by a significant gain in the dynamical stability and, hence, the robustness of their resulting climbing capability. The paper's second contribution documents the design and offers preliminary empirical data arising from a physical instantiation of this model. Notwithstanding the substantial differences between the proposed bio-inspired template and this physical manifestation, initial data suggest the mechanical climber may be capable of reproducing both the motions and ground reaction forces characteristic of dynamical climbing animals. Even without proper tuning, the robot's steady state trajectories manifest a substantial exchange of kinetic and potential energy, resulting in vertical speeds of 0.30 m/s (0.75 bl/s) and claiming its place as the first bio-inspired dynamical legged climbing platform.

Empirical data taken from fast climbing sprawled posture animals reveals the presence of strong lateral forces with significant pendulous swaying of the mass center trajectory in a manner captured by a recently proposed dynamical template [1, 2]. In this simulation study we explore the potential benefits of pendulous dynamical climbing in animals and in robots by examining the stability and power advantages of variously more and less sprawled limb morphologies when driven by conventional motors in contrast with animal-like muscles. For open loop models of gait generation inspired by the neural-deprived regimes of high stride-frequency animal climbing, our results corroborate earlier hypotheses that sprawled posture may be required for stability. For quadratic-in-velocity power output actuation models typical of commercially available electromechanical actuators, our results suggest the new hypothesis that sprawled posture may confer significant energetic advantage. In notable contrast, muscle-powered climbers do not experience an energetic benefit from sprawled posture due to their sufficiently distinct actuator characteristics and operating regimes. These results suggest that the potentially significant benefits of sprawled posture climbing may be distinctly different depending upon the details of the climbers sensorimotor endowment. They offer a cautionary instance against mere copying of biology by engineers or rote study of physical models by biologists through this reminder of how even simple questions addressed by simple models can yield nuanced answers that only begin to hint at the complexity of biological designs and behaviors.

We explore an approach to incorporating task and motor thermal dynamics in the selection of actuators for legged robots, using both analytical and simulation methods. We develop a motor model with a thermal component and apply it to a vertical climbing task; in the process, we optimally choose gear ratio and therefore eliminate it as a design parameter. This approach permits an analytical proof that continuous operation yields superior thermal performance to intermittent operation. We compare the results of motor sizing using our proposed method with more conventional techniques such as using the continuously permissible current specification. Our simulations are run across a database of commercially available motors, and we envision that our results might be of immediate use to robot designers for motor as well as gearbox selection. Abstract-We explore an approach to incorporating task and motor thermal dynamics in the selection of actuators for legged robots, using both analytical and simulation methods. We develop a motor model with a thermal component and apply it to a vertical climbing task; in the process, we optimally choose gear ratio and therefore eliminate it as a design parameter. This approach permits an analytical proof that continuous operation yields superior thermal performance to intermittent operation. We compare the results of motor sizing using our proposed method with more conventional techniques such as using the continuously permissible current specification. Our simulations are run across a database of commercially available motors, and we envision that our results might be of immediate use to robot designers for motor as well as gearbox selection.