No abstract

The understanding of soot formation in combustion processes and the optimization of practical combustion systems require in situ measurement techniques that can provide important characteristics, such as particle concentrations and sizes, under a variety of conditions. Of equal importance are techniques suitable for characterizing soot particles produced from incomplete combustion and emitted into the environment. Additionally, the production of engineered nanoparticles, such as carbon blacks, may benefit from techniques developed. This review discusses considerations for selection of laser and detection characteristics to address application-specific needs. The benefits of using LII for measurements of a range of nanoparticles in the fields mentioned above are demonstrated with some typical examples, covering simple flames, internal-combustion engines, exhaust emissions, the ambient atmosphere, and nanoparticle production. We also remark on less well-known studies employing LII for particles suspended in liquids.An important aspect of the paper is to critically assess the improvement in the understanding of the fundamental physical mechanisms at the nanoscale and the determination of underlying parameters; we also identify further research needs in these contexts. Building on this enhanced capability in describing the underlying complex processes, LII has become a workhorse of particulate measurement in a variety of fields, and its utility continues to be expanding. When coupled with complementary methods, such as light scattering, probe-sampling, molecular-beam techniques, and other nanoparticle instrumentation, new directions for research and applications with LII continue to materialize.

No abstract

Laser-induced incandescence (LII) has proved to be a useful diagnostic tool for spatially and temporally resolved measurement of particulate (soot) volume fraction and primary particle size in a wide range of applications, such as steady flames, flickering flames, and Diesel engine exhausts. We present a novel LII technique for the determination of soot volume fraction by measuring the absolute incandescence intensity, avoiding the need for ex situ calibration that typically uses a source of particles with known soot volume fraction. The technique developed in this study further extends the capabilities of existing LII for making practical quantitative measurements of soot. The spectral sensitivity of the detection system is determined by calibrating with an extended source of known radiance, and this sensitivity is then used to interpret the measured LII signals. Although it requires knowledge of the soot temperature, either from a numerical model of soot particle heating or experimentally determined by detecting LII signals at two different wavelengths, this technique offers a calibration-independent procedure for measuring soot volume fraction. Application of this technique to soot concentration measurements is demonstrated in a laminar diffusion flame.

No abstract