This chapter considers the methods to increase the performance and reliability of the reprofile machining of the wheel tread profile. Proceeding from the fact that both in milling and turning, the cutting tool is a key element to ensure performance and reliability of the manufacturing process, the study considers the methods to increase the performance properties of cutting tools. In particular, the study includes the investigation of the following ways to improve cutting tools (carbide inserts) to machine wheel tread profile: replacement of traditional grades of WC-TiC-Co carbides with more efficient ones based on WC-TiC-TaC-Co; application of special thermally conductive pads, gaskets, and pastes to improve the distribution of heat flows in the cutting zone; and application of modern nanoscale composite multilayer coatings (NMCC). It is noted that even higher performance can be obtained by combining the above three methods, in particular, by combining application of special thermal pads and NMCC.

The chapter discusses the tribological properties of samples with multilayer composite nanostructured Ti-TiN-(Ti,Cr,Al,Si)N, Zr-ZrN-(Nb,Zr,Cr,Al)N, and Zr-ZrN-(Zr,Al,Si)N coatings, as well as Ti-TiN-(Ti,Al,Cr)N, with different values of the nanolayer period λ. The relationship between tribological parameters, a temperature varying within a range of 20–1000°C, and λ was investigated. The studies have found that the adhesion component of the coefficient of friction (COF) varies nonlinearly with a pronounced extremum depending on temperature. The value of λ has a noticeable influence on the tribological properties of the coatings, and the nature of the mentioned influence depends on temperature. The tests found that for the coatings with all studied values of λ, an increase in temperature first caused an increase and then a decrease in COF.