In this paper, a dual-band terahertz absorber with two passbands is proposed. The absorber is composed of periodic patterned graphene arrays on the top of a SiO 2 substrate and a frequency selective surface (FSS) on the bottom of the substrate. The simulated results indicate that there are two absorption bands (absorption greater than 90%) ranging from 0.54 to 0.84 THz and 2.13 to 2.29 THz. It is almost transparent to incident waves (transmission greater than 50%) below 0.19 THz and between 1.3 and 1.67 THz with a center frequency of 1.49 THz. The absorber has a good tolerance to the transverse electric (TE) and transverse magnetic (TM) polarized wave oblique incidence, and the transmission rate of the passbands remains greater than 50% within 70 degrees. Moreover, the absorption rate of the absorber can be tuned by the chemical potential of graphene. The structure with absorption and transmission properties has potential applications in filtering, sensing, detecting and antenna stealth.

The traditional corner reflector is a type of classical passive jamming equipment but with several shortcomings, such as fixed electromagnetic characteristics and a poor response to radar polarization. In this paper, an eight-quadrant corner reflector equipped with an electronically controlled miniaturized active frequency-selective surface (MAFSS) for X band is proposed to obtain better radar characteristics controllability and polarization adaptability. The scattering characteristics of the new eight-quadrant corner reflector for different switchable scattering states (penetration/reflection), frequency and polarization are simulated and analyzed. Results show that the RCS modulation depth, which is jointly affected by the electromagnetic wave frequency and incident directions, can be maintained above 10 dB in the majority of directions, and even larger than 30 dB at the resonant frequency. Moreover, the RCS adjustable bandwidth can be as wide as 1 GHz in different incident directions.

No abstract

In this paper, a wideband slot antenna element and its array with stereoscopic differentially fed structures are proposed for the radar system. Firstly, a series of slots and a stereoscopic differentially fed structure are designed for the antenna element, which makes it possess a wide bandwidth, stable radiation characteristics, and rather high gain. Moreover, the stereoscopic feeding structure can firmly support the antenna’s radiation structure and reduce the influence of feeding connectors on radiating performance. Secondly, a 4 × 4 array is designed using the proposed antenna element. And a hierarchical feeding network is designed for the array on the basis of the stereoscopic differentially fed structure. For validation, the antenna element and 4 × 4 array are both fabricated and measured: (1) the measured −10 dB impedance bandwidth of the antenna element is 62% (6.8–12.9 GHz) and the gain within the entire band is 5–9.7 dBi and (2) the measured −10 dB impedance bandwidth of the array is approximately 50% (7 to 12 GHz) with its gain being 14–19.75 dBi within the entire band. Notably, measured results agree well with simulations and show great advantages over other similar antennas on bandwidth and gain.

In this paper, a compact, wideband, and high-efficiency substrate integrated waveguide (SIW) feeding cavity-backed aperture-coupled magneto-electric (ME) dipole antenna element and its array are proposed. Firstly, an SIW cavity-backed and a modified bowtie dipole are designed for the antenna element which makes it possess a high gain and wide impedance bandwidth. The antenna element covers an impedance bandwidth of 66.3% from 10.7 to 21.3 GHz with a peak gain of 10.3 dBi. Secondly, a 4 × 4 array is designed using the proposed antenna element. And a full-corporate substrate integrated waveguide feeding network is introduced to excite the array elements for the antenna application with wide bandwidth and high efficiency. For validation, a prototype of 4 × 4 array is fabricated by standard printed circuit board (PCB) facilities and further measured. The measured −10 dB impedance bandwidth of the proposed 4 × 4 antenna array is 30% (12.75–17.25 GHz) with its gain being 18.2–20.9 dBi within the entire band. The measured maximum aperture efficiency of the antenna array is 94% at 14.92 GHz. Notably, the measured results agree well with simulations, and it shows great advantages over other similar antennas on efficiency and bandwidth.