No abstract

As plastic pollution becomes more serious, we need to find out eco‐friendly materials to alleviate the pollution. Polylactide (PLA) and poly (butylene adipate‐co‐terephthalate) (PBAT) will be one of the most attractive materials to replace those undegradable materials. However, few studies research the segregated conductive PLA/PBAT/MWCNTs nanocomposites. Herein, PLA/PBAT/MWCNTs nanocomposites with the segregated structure were successfully fabricated firstly. The MWCNTs are selectively dispersed in the continuous PBAT phase. The nanocomposite with segregated structure owns excellent electric conductivity. When the content of MWCNTs is 0.41 vol%, the electrical conductivity of composites with segregated structure is 9.43 × 10−4 S/m, which is about 5 orders higher than the nanocomposites without the segregated structure (1.75 × 10−10 S/m). The segregated nanocomposite with 2 wt% (1.18 vol%) MWCNTs owns excellent electromagnetic interference (EMI) of 24 dB, while the ordinary structure of composite is only 17 dB.

In order to obtain the automatic simulation generation of traditional handmade batik patterns in a computer, this paper proposes the automatic generation method of batik flower patterns based on fractal geometry. Firstly, we analyze the fractal characteristics of batik flowers and design an automatic flower generation algorithm based on a two-dimensional iterated function system (IFS) and a curve function. The algorithm forms a complete flower pattern. Secondly, a nonlinear function is defined and the flower pattern is introduced into the nonlinear function to iterate and change. On this basis, we present an automatic generation method of different distribution patterns for flower patterns which obtains the most effective range of each parameter value for each function. Finally, in order to verify the feasibility of the automatic generation method of batik flower patterns, we develop an automatic generation experiment system for batik patterns via an interactive way of working. The results show that the user or designer can quickly and automatically simulate a series of flower patterns by changing the relevant parameter values, realizing the digitization and innovative design of the pattern and enriching the batik pattern base.

The formation of dense and complete conductive networks in the electromagnetic interference (EMI) shielding composite is the basis for its excellent EMI shielding performance. In this work, biodegradable poly (lactic acid)/poly (butylene succinate)/multi‐walled carbon nanotubes (PLA/PBS/MWCNTs) nanocomposites with segregated structures were successfully prepared via melt blending. Due to the successful preparation of segregated structures and the fact that MWCNTs were mainly dispersed in the PBS phase, an ultralow percolation value of 0.071 vol% was achieved in biodegradable PLA/PBS/MWCNTs nanocomposites. When the MWCNTs content is 0.499 vol%, the electrical conductivity of the PLA/PBS/MWCNTs nanocomposites with segregated structures is around 7.15 × 10−3 S/m, which is about 6 orders of magnitude higher than that of the PLA/PBS/MWCNTs nanocomposites with normal structures. When the MWCNTs content increased to 2.0 wt%, the average EMI shielding effectiveness (SE) of segregated structures remained stable at 27.56 dB, which can effectively block 99.82% of the microwave radiation. Furthermore, as suggested in the EMI shielding analysis, the EMI shielding of PLA/PBS/MWCNTs nanocomposites is mainly through absorption shielding, so there will be no secondary environmental pollution. This study provides a practical and universal method to prepare biodegradable conductive polymer composites with ultralow percolation threshold and excellent EMI SE.

Due to the white pollution, the recycling of waste plastics has attracted more and more attention. In this research, waste polypropylene/Ethylene‐octene elastomer/nano‐SiO2 composites (wPP/POE/SiO2) were melt‐blended using an Eccentric Rotor Extruder (ERE) dominated by elongational flow field and a Torque Rheometer (TR) dominated by shear flow field, respectively. The micromorphology, mechanical, crystallization, thermal and rheological properties of wPP/POE/SiO2 blends were studied. Compared to the blends fabricated by TR, the wPP/POE/SiO2 blends with different compositions fabricated by ERE showed higher tensile strength, flexural strength, and modulus. Particularly, without sacrificing the tensile strength, the notched impact strength of the wPP/POE/SiO2 blends fabricated by ERE increased to 13.53 kJ/m2, a factor of 3 times larger than that of neat wPP. The enhancement of impact strength of the wPP/POE/SiO2 blends fabricated by ERE could be ascribed to the good dispersion of POE under elongational flow and the increase of PP crystallinity. The finding from this work provides an efficient way to recycle wPP.