Soil water content is one of the most important factors affecting the safety and stability of buildings or structures, especially in roadbeds, slopes, earth dams and foundations. Accurate assessments of soil water content can ensure the quality of construction, reduce construction costs and prevent accidents, among other benefits. In this study, ground penetrating radar (GPR) was used to detect and evaluate changes in soil water content. The GPR signal is usually nonstationary and nonlinear; however, traditional Fourier theory is typically suitable for periodic stationary signals, and cannot reflect the law of the frequency and energy of the GPR signal changing with time. Wavelet transform has good time-frequency localization characteristics, and therefore represents a new method for analyzing and processing GPR signals. According to the time-frequency characteristics of GPR signals, in this paper, a new biorthogonal wavelet basis which was highly matched with the GPR waveform was constructed using the lifting framework of wavelet theory. Subsequently, an evaluation method, namely, the wavelet packet-based energy analysis (WPEA) method, was proposed. The method was utilized to calculate the wavelet packet-based energy indexes (WPEI) of the GPR single-channel signals for clay samples with water contents ranging from 10% to 24%. The research results showed that there was a highly correlated linear relationship between the WPEI and the soil water contents, and the relationship between the two was fitted with a linear fitting function. The feasibility of the method was verified by comparing our results with those obtained using classical wavelet bases to perform the wavelet packet transform. The large-area, continuous scanning measurement method of GPR was shown to be suitable for evaluations of soil water contents in roadbeds, slopes, earth dams, and foundations.

Construction and demolition (C&D) waste has become a research hotspot due to the need for environmental sustainability and strength enhancement of cementitious materials. However, wider applications of C&D waste are limited, as its non-homogeneous surface nature limits its workability. This research evaluated the feasible utilization of C&D waste as aggregates in polypropylene-fiber-reinforced cement-stabilized soil (CSS) under sulfate-alkali activation. CSS specimens incorporated Portland cement and C&D waste in 10%, 20%, and 30% proportions. Also, polypropylene fiber after alkali activation by sodium sulfate (at 0.2%, 0.4%, and 0.8% dosing level) was defined as 1%, 2%, and 4%. Strength enhancement was examined through unconfined compressive strength (UCS) and flexural strength tests at 7, 14 and 28 days. Test results indicated that mechanical properties showed significant improvement with increasing levels of Portland cement and sodium sulfate, while the improvement dropped after excessive addition of C&D waste and polypropylene fiber. Optimal proportioning was determined as 30%, 4%, 20%, and 0.8% for Portland cement, polypropylene fiber, C&D waste, and sodium sulfate, respectively. Scanning electron microscope (SEM) analysis attributed the enhancement to hydration product (ettringite) formation, bridging effect and increased particle friction. Additionally, the decrease in amplification was ascribed to the destruction of interface transition-zone (ITZ) strength, resulting in premature failure.

Cement stabilized soil (CSS) yields wide application as a routine cementitious material due to cost-effectiveness. However, the mechanical strength of CSS impedes development. This research assesses the feasible combined enhancement of unconfined compressive strength (UCS) and flexural strength (FS) of construction and demolition (C&D) waste, polypropylene fiber, and sodium sulfate. Moreover, machine learning (ML) techniques including Back Propagation Neural Network (BPNN) and Random Forest (FR) were applied to estimate UCS and FS based on the comprehensive dataset. The laboratory tests were conducted at 7-, 14-, and 28-day curing age, indicating the positive effect of cement, C&D waste, and sodium sulfate. The improvement caused by polypropylene fiber on FS was also evaluated from the 81 experimental results. In addition, the beetle antennae search (BAS) approach and 10-fold cross-validation were employed to automatically tune the hyperparameters, avoiding tedious effort. The consequent correlation coefficients (R) ranged from 0.9295 to 0.9717 for BPNN, and 0.9262 to 0.9877 for RF, respectively, indicating the accuracy and reliability of the prediction. K-Nearest Neighbor (KNN), logistic regression (LR), and multiple linear regression (MLR) were conducted to validate the BPNN and RF algorithms. Furthermore, box and Taylor diagrams proved the BAS-BPNN and BAS-RF as the best-performed model for UCS and FS prediction, respectively. The optimal mixture design was proposed as 30% cement, 20% C&D waste, 4% fiber, and 0.8% sodium sulfate based on the importance score for each variable.

Advanced geological prediction of tunnels has become an indispensable task to ensure the safety and effectiveness of tunnel construction before excavation in karst areas. Geological disasters caused by unfavorable geological conditions, such as karst caves, faults, and broken zones ahead of a tunnel face, are highly sudden and destructive. Determining how to predict the spatial location and geometric size of unfavorable geological bodies accurately is a challenging problem. In order to facilitate a three-dimensional quantitative analysis of the filler material ahead of the tunnel face, a biorthogonal wavelet with short support, linear phase, and highly matching waveform of ground penetrating radar (GPR) wavelet is constructed by lifting a simple and general initial filter on the basis of lifting wavelet theory. A method for a time–energy density analysis of wavelet transforms (TEDAWT) is proposed in accordance with the biorthogonal wavelet. Fifteen longitudinal and horizontal survey lines are used to detect void fillers of different heights. Then, static correction, DC bias, gain, band-pass filtering, and offset processing are performed in the original GPR profile to enhance reflected signals and converge diffraction signals. A slice map of GPR profile is generated in accordance with the relative position of longitudinal and horizontal survey lines in space. The wavelet transform analysis of a single-channel signal of each survey line is performed by adopting the TEDAWT method because of the similar rule of the single-channel signal of GPR on the waveform overlay and the ability of the constructed wavelet basis to highlight the time-frequency characteristics of GPR signals. The characteristic value points of the first and second interfaces of the void fillers can be clearly determined, and the three-dimensional spatial position and geometric sizes of different void fillers can be obtained. Therefore, the three-dimensional visualization of GPR data is realized. Results show that the TEDAWT method has a good practical application effect in the quantitative identification of void fillers, which provides a basis for the interpretation of advanced geological prediction data of tunnels and for the construction decision.

No abstract