a b s t r a c tThis work presents a study of non-premixed flames at supercritical-pressure conditions. Emphasis is placed on flame stability in liquid rocket engines fueled with liquid oxygen and gaseous hydrogen. The flame structure sensitivity to strain, pressure, temperature and real-fluid effects was investigated in detailed opposed-jet flames calculations. It is shown that the flame is very robust to strain, that the flamelet assumption is valid for the conditions of interest, and that real-fluid phenomena can have a significant impact on flame topology. At high-pressure supercritical conditions, small pressure or temperature variations can induce strong changes of thermodynamic properties across the flame. A substantial finding was also that the presence of water from combustion significantly increases the critical pressure of the mixture, but this does not lead to a saturated state where two-phase flow may be observed. The present study then shows that a single-phase real-fluid approach is relevant for supercritical hydrogen-oxygen combustion. Resultant observations are used to develop a flamelet model framework that combines detailed real-fluid thermodynamics with a tabulated chemistry approach. The governing equation for energy contains a compressible source term that models the flame. Through this approach, the solver is capable of capturing compressibility and strain-rate effects. Good agreements have been obtained with respect to detailed computations. Heat release sensitivity to strain and pressure variations is also recovered. Consequently, this approach can be used to study combustion stability in actual burners. The approach preserves the density gradient in the high-shear region between the liquid-oxygen jet and product rich flame region. The latter is a key requirement to properly simulate dense-fluid jet destabilization and mixing in practical devices.

Large Eddy Simulation (LES) is used to compute the spark ignition in a turbulent methane jet flowing into air. Full ignition sequences are calculated for a series of ignition locations using a one-step chemical scheme for methane combustion coupled with the thickened flame model. The spark ignition is modeled in the LES as an energy deposition term added to the energy equation. Flame kernel formation, the progress and topology of the flame propagating upstream, and stabilization as a tubular edge flame are analyzed in detail and compared to experimental data for a range of ignition parameters. In addition to ignition simulations, statistical analysis of non-reacting LES solutions are carried out to discuss the ignition probability map established experimentally.

No abstract

International audienceBecause of the extreme complexity of physical phenomena at high pressure, only limited data are available for solver validation at device-relevant conditions such as liquid rocket engines, gas turbines, or diesel engines. In the present study, a two-dimensional direct numerical simulation is used to establish a benchmark for supercritical flow at a high Reynolds number and high-density ratio at conditions typically encountered in liquid rocket engines. Emphasis has been placed on maintaining the flow characteristics of actual systems with simple boundary conditions, grid spacing, and geometry. Results from two different state-of-the-art codes, with markedly different numerical formalisms, are compared using this benchmark. The strong similarity between the two numerical predictions lends confidence to the physical accuracy of the results. The established database can be used for solver benchmarking and model development at conditions relevant to many propulsion and power systems

No abstract