Mucin-type O-glycans have profound effects on the structure and stability of glycoproteins. O-Glycans on the cell surface proteins also modulate the cell's interactions with the surrounding environments and other cells. The synthetic pathway of O-glycans involves a large number of enzymes with diverse substrate specificity. The expression pattern of these enzymes is cell and tissue-specific, thus making the pathway highly diverse. To facilitate pathway analysis in a cell and tissuespecific fashion, we developed an integrated platform of RING (Rule Input Network Generator) and O-GlycoVis. RING uses an English-like reaction language to describe the substrate specificity of enzymes and additional constraints on the formation of the glycan products. Using this information, the RING generates a list of possible glycans, which is used as input into O-Glycovis. O-GlycoVis displays the glycan distribution in the pathway and potential reaction paths leading to each glycan. With the input glycan data, O-GlycoVis also traces all possible reaction paths leading to each glycan and outputs pathway maps with the relative abundance levels of glycans overlaid. O-Glycan profiles from two breast cancer cell lines, MCF7 and T47d, human umbilical vascular endothelium cells, Chinese Hamster Ovary cells were generated based on transcriptional data and compared with experimentally observed O-glycans. This RING-based program allows rules to be added or subtracted for network generation and visualization of networks of O-glycosylation network of different tissues and species.

Duplex stainless steels are largely applied in petrochemical industries due to their high corrosion resistance and mechanical performance. Their applicability also requires a great wear resistance, which can be enhanced by friction stir processing (FSP), a surface hardening technique. In this work, FSP is utilized to process surfaces of UNS S32101 and UNS S32750. The materials were analyzed by EBSD in order to determine grain size and phase fraction. Microhardness tests were used to verify and compare the shifting of hardness values from 296 ± 8 to 314 ± 11 HV 0.2/15 and from 323 ± 8 to 350 ± 8 HV 0.2/15 for UNS S32101 and S32750, respectively. Abrasion tests were executed to study the wear behavior of both processed and unprocessed alloys. Abrasion tests indicated that the hardening by FSP promoted decrement of abrasive wear resistance. Volumetric loss increased after FSP, from 52.1 ± 0.5 to 53 ± 2 mm 3 , for UNS S32101, and from 50 ± 2 to 56.3 ± 0.3 mm 3 for UNS S32750. Tensile tests results were fitted to Hollomon's equation in order to identify mechanical properties and tendencies of strain hardening. SEM images were used to classify the wear micromechanisms acting on the samples. The results suggest that FSP can promote modifications of wear mechanisms and these changes can be correlated to the alloys' microstructure.

No abstract

No abstract

The use of Ti-Ni memory alloys covers several fields of application such as medicine, dentistry, actuators, sensors among others. Because of the thermomechanical behavior of these materials, they are an object of continuous studies and their properties are related to the occurrence of thermoelastic martensitic phase transformations. The thermal analyzes were performed using dilatometry and differential scanning calorimetry to determine the temperatures that occurred transformations during the cooling and heating, as well as to evaluate the influence of the thermal treatments performed by dilatometry. The thermomechanical behavior was also evaluated by the internal friction that measured behavior damping considering the structural and microstructural changes. The calorimetry measurements indicated suppression of the R phase through decomposition of precipitates of Ti 3 N 4 after the thermal treatments, that were corroborated by dilatometry and microhardness. This phase was also studied by the technique of internal friction, which showed that the mechanical damping coefficient increased as a function of temperature, due to the movement of the defects induced by tension.