A blend of organic semiconductors and photocrosslinkable insulating polymers was photolithographically patterned to yield organic thin-film transistors (OTFTs). The semiconducting polymer of the blend, poly(3-hexylthiophene), was present as a nanofibrillar network and yielded excellent electronic properties. The insulating polymer matrix, poly(vinyl cinnamate), provided the photosensitivity required for photopatterning. The photopatterned TFT devices showed large on/off ratios (>10 5 ) and high mobilities (0.015 cm 2 V À1 s À1 ) comparable to those of devices patterned by conventional means using the same semiconducting materials. This simple method permitted the highresolution cost-effective patterning of organic semiconductors and may play an important role in the mass-production of organic electronic devices.

1,6-bis(trichlorosilyl)hexane (C6Cl), polystyrene (PS), and cross-linked polystyrene (CPS) were investigated as gate dielectric modified layers for high performance organic transistors. The influence of the surface energy, roughness and morphology on the charge transport of the organic thin-film transistors (OTFTs) was investigated. The surface energy and roughness both affect the grain size of the pentacene films which will control the charge carrier mobility of the devices. Pentacene thin-film transistors fabricated on the CPS modified dielectric layers exhibited charge carrier mobility as high as 1.11 cm2 V-1 s-1. The bias stress stability for the CPS devices shows that the drain current only decays 1% after 1530 s and the mobility never decreases until 13530 s.

We propose a dual-view integral imaging (DVII) three-dimensional (3D) display using polarized glasses. The DVII 3D display consists of a display panel, a polarized parallax barrier, a microlens array, and two pairs of polarized glasses. Two kinds of elemental images, which are captured from two different 3D scenes, are alternately arranged on the display panel. The polarized parallax barrier is attached to the display panel and composed of two kinds of units that are also alternately arranged. The polarization directions between adjacent units are perpendicular. The polarization directions of the two pairs of polarized glasses are the same as those of the two kinds of units of the polarized parallax barrier, respectively. The lights emitted from the two kinds of elemental images are modulated by the corresponding polarizer units and microlenses, respectively. Two different 3D images are reconstructed in the viewing zone and separated by using two pairs of polarized glasses. A prototype of the DVII 3D display is developed and two 3D images can be presented simultaneously, verifying the hypothesis.

A 3D display based on a parallax barrier with multiview zones is proposed. This display consists of a 2D display panel and a parallax barrier. The basic element of the parallax barrier has three narrow slits. They can show three columns of subpixels on the 2D display panel and form 3D pixels. The parallax barrier can provide multiview zones. In these multiview zones, the proposed 3D display can use a small number of views to achieve a high density of views. Therefore, the distance between views is the same as the conventional ones with more views. Considering the proposed display has fewer views, which bring more 3D pixels in the 3D images, the resolution and brightness will be higher than the conventional ones. A 12-view prototype of the proposed 3D display is developed, and it provides the same density of views as a conventional one with 28 views. Experimental results show the proposed display has higher resolution and brightness than the conventional one. The cross talk is also limited at a low level.

We propose a dual-view integral imaging display using a polarizer. It consists of a display panel, a polarizer, a microlens array, and two pairs of polarizer glasses. The polarizer comprises the left and right subpolarizers whose polarization directions are orthogonal. Two kinds of elemental images are captured from different three-dimensional scenes and located on the left and right half of the display panel. The lights emitting from two kinds of elemental images are polarized by the left and right subpolarizers. The polarization directions of the two pairs of polarizer glasses used in the left and right viewing zones are the same as those of the right and left subpolarizers, respectively. Two different three-dimensional images are simultaneously viewed in the left and right viewing directions by wearing two pairs of polarizer glasses. A prototype of the proposed dual-view integral imaging display is developed, and the experimental results verify the hypothesis.