Phytate had been investigated as a corrosion inhibitor for NdFeB magnets in an aqueous salt solution. Potentiodynamic polarisation, electrochemical impedance spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy and energy dispersive spectroscopy were employed for this investigation. The polarisation curves results revealed that phytate acted as a mixed type inhibitor. The inhibition efficiency was found to increase by maximum 96.5% through increasing the phytate concentration to 0.5 mM at 308C. The inhibition was proposed to result from the adsorption of phytate on NdFeB magnets, which was found to obey the Langmuir adsorption isotherm. The inhibition mechanism was explored by the potential of zero charge (E pzc ) measurement at the solution/metal interface.

In the process of assembling and machining, the aluminum alloy components will directly expose to aggressive environment once Al‐clad is destroyed. As such, it is meaningful to investigate the corrosion behavior of 2A12 aluminum alloy in neutral salt spray environment after removing Al‐clad coating with different processes. In this work, the corrosion behaviors of the aluminum alloy were evaluated by the changes in morphology, composition, and maximum mean corrosion depth. The results show that the corrosion rate of 2A12 aluminum alloy was very high in the first 24 h, and then decreased with test duration. Among all the Al‐clad removing processes, the one at higher temperature (90–100 °C) for shorter time (3–4 min) exhibit the best performance in the presence of inhibitor and sanding. The three possible reasons include effect of inhibitor adsorbing, role of sanding, impact of higher temperature, and shorter time.