Coblending of seismic attributes is used in the interpretation of channel geometries in the Rence Field of Niger Delta, Nigeria. We aimed at seismically defining the geometries of hydrocarbon reservoirs with particular emphasis on channels in the shallow marine (offshore) Niger Delta. The coblending application enhanced the ease of detection and the continuity of the channels, leaving the channel environs unchanged. The result of the seismic facies analysis revealed that the Rence Field can be distinguished into two seismic facies, namely, layered complexes and chaotic complexes. The result of well to seismic ties revealed high- and low-amplitude reflection events for sand and shale units, respectively. Seismic structural interpretation of the Rence Field revealed 4 major regional faults and 12 minor faults. Seven of the faults were antithetic, and the rest were synthetic faults. One mega-channel feature that trends east–west was identified in the attribute maps generated. It was characterized by sinuosity of 1.3, with a length of 22,500 m, and a distance of 17,500 m. The average depth of the channel was approximately 170 m with amplitude of 1670 m and the wavelength as high as 7640 m. A depositional model generated from the attribute maps indicated a prograding fluvial environment of deposition. The attribute map also determined that there was shifting in the location of barrier bars within the area. This shifting could be attributed to the growth fault mechanism. At the stoss side of the sinusoidal channel, there were prominent sand point bar sequences. The petrophysical analysis of the well data revealed 90% net-to-gross, 28% porosity, 27% volume of shale, and 24% water saturation indicating that the reservoir was of pay quality. Based on the petrophysical analysis, results, and identification of channel deposits, the study area proved highly promising for hydrocarbon exploration.

Studies were carried out to determine asbestos fiber levels in cosmetic (talc powder) and non-cosmetic (gauze pad, plastic filler and ceiling tiles) products sold in market outlets within Enugu, metropolis, Enugu State, Nigeria, using standard established procedures. The samples were pretreated based on its physical make-up and the asbestos fiber levels determined using scanning electron microscopy (SEM) with energy dispersing spectroscopy techniques. The mean range of asbestos fiber was, 0.

No abstract

No abstract

This study compared the physicochemical parameters and heavy metal levels in soil samples from selected anthropogenic sites within Enugu metropolis, Enugu State, Nigeria using standard analytical methods. Soil samples at depths (0-20 cm) and (20-40 cm) were collected from waste dump sites, metal scrap dumps, fuel filling stations and auto-mechanic workshops and analyzed for physicochemical characteristics and heavy metal levels. Atomic absorption spectrophotometer was used for heavy metal determination while conventional analytical methods were employed for physicochemical parameters evaluation of the soil samples. At soil depths 0-20 cm and 20-40 cm the respective mean range of pH, electrical conductivity, organic matter and organic carbon contents in the soil samples were, 6.33-6.74, 101.46-123.21 µS/cm, 6.41%-8.35% and 13.73%-16.14% for auto-mechanic workshops; 6.92-7.43, 56.46-60.02 µS/cm, 1.53%-2.20% and 11.93%-12.60% for fuel filling stations; 7.14-7.84, 70.81-77.71 µS/cm, 3.81%-4.12% and 8.57%-9.24% for metal scrap dumps; 6.54-6.81, 94.40-100.71 µS/cm, 8.83%-10.75% and 18.26%-20.81% for waste dump sites. The pH of the top soil samples from auto-mechanical workshop was below the WHO recommended limits for agricultural purposes. The physic-chemical characteristics of the soil samples decreased with soil depths indicating therefore that anthropogenic activities greatly influence the soil characteristics at the top soils than How to cite this paper: