Rochette, P., Angers, D. A., Chantigny, M. H., Gasser, M.-O., MacDonald, J. D., Pelster, D. E. and Bertrand, N. 2013. NH 3 volatilization, soil [Formula: see text] concentration and soil pH following subsurface banding of urea at increasing rates. Can. J. Soil Sci. 93: 261–268. Subsurface banding of urea can result in large ammonia (NH3) emissions following a local increase in soil ammonium ([Formula: see text]) concentration and pH. We conducted a field experiment to determine how application rates of subsurface banded urea impact NH3 volatilization. Urea was banded at a 5 cm depth to a silty loam soil (pH=5.5) at rates of 0, 6.1, 9.2, 13.3 and 15.3 g N m−1. Ammonia volatilization (wind tunnels), and soil [Formula: see text] concentration and pH (0–10 cm) were monitored for 25 d following urea application. Volatilization losses increased exponentially with urea application rate to 11.6% of applied N for the highest urea rate, indicating that as more urea N was added to the soil a larger fraction was lost as NH3. Cumulative NH3-N emissions were closely related (R 2≥0.85) to maximum increases in soil [Formula: see text] concentration and pH, and their combined influence likely contributed to the nonlinearity of the volatilization response to urea application rate. However, the rapid increase in NH3 losses when soil pH rose above 7 suggests that soil pH was the main factor explaining the nonlinear response of NH3 volatilization. When compared with previous studies, our results suggest that the response of NH3 volatilization losses to urea application rate in acidic soils are controlled by similar factors whether urea is broadcasted at the soil surface or subsurface banded.

No abstract

Ziadi, N., Angers, D. A., Gagnon, B., Lalande, R., Morel, C., Rochette, P. and Chantigny, M. H. 2014. Long-term tillage and synthetic fertilization affect soil functioning and crop yields in a corn–soybean rotation in eastern Canada. Can. J. Soil Sci. 94: 365–376. Adoption of conservation practices can induce beneficial changes to soil properties and related crop yields in which magnitude varies according to soil and climatic conditions but usually increases with time. A long-term field experiment was initiated in 1992 at L'Acadie in southern Quebec on a clay loam soil to evaluate the effect of tillage [mouldboard plow (MP) vs. conservation (CT)], synthetic N fertilization (0, 80, and 160 kg N ha−1) and synthetic P fertilization (0, 17.5, and 35 kg P ha−1) on soil functioning and grain yields of a corn–soybean rotation. Soil tillage was performed every year while synthetic fertilizers were applied only to the corn. Results obtained 12 to 20 yr after initiation of the study indicated that CT enhanced organic C accumulation, NO3-N, P and K availability, microbial biomass and activity, and microbial community structure in the upper soil layer, likely due to leaving crop residues at the soil surface. The MP practice resulted in greater organic C content deeper, near the bottom of the plow layer, which promoted soil microbial activity at that depth. However, soil N2O emissions were not affected by tillage. The N and P fertilization increased the availability of these nutrients, but had no significant effect on the soil microbial biomass, activity, and structure. Linear relationships were established between soil available P and cumulative P budgets obtained under MP or 0 kg P ha−1 under CT. Crop yields varied by year in this study but on average, MP yielded 10% more corn and 13% more soybeans than CT. Corn yield increased linearly with added synthetic N each year, whereas soybean yield was little affected by residual N, and both crops did not respond to fertilizer P. Response to N fertilization did not differ due to tillage or P. Despite higher costs associated with plowing, the profitability of MP was greater than CT on this clay loam soil due to greater yields. Specialized management practices (e.g., delayed planting, better herbicide selection, fall cover crop, in-row tillage) might help to improve CT performance on these cool, humid fine-textured soils.

Pelster, D. E., Chantigny, M. H., Rochette, P., Angers, D. A., Laganière, J., Zebarth, B. and Goyer, C. 2013. Crop residue incorporation alters soil nitrous oxide emissions during freeze–thaw cycles. Can. J. Soil Sci. 93: 415–425. Freeze–thaw (FT) cycles stimulate soil nitrogen (N) and carbon (C) mineralization, which may induce nitrous oxide (N2O) emissions. We examined how soybean (Glycine max L.) and corn (Zea mays L.) residue incorporation affect N2O emissions from high C content (35 g kg−1) silty clay and low C content (19 g kg−1) sandy loam soils over eight 10-d FT cycles, as a function of three temperature treatments [constant at +1°C (unfrozen control), +1 to −3°C (moderate FT), or +1 to −7°C (extreme FT)]. In unamended soils, N2O emissions were stimulated by FT, and were the highest with extreme FT. This was attributed to the increased NO3 availability measured under FT. Application of mature crop residues (C:N ratios of 75 for soybean and 130 for corn) caused rapid N immobilization, attenuating FT-induced N2O emissions in the silty clay. In the sandy loam, residue addition also induced immobilization of soil mineral N. However, N2O emissions under moderate FT were higher with than without crop residues, likely because N2O production in this low-C sandy loam was stimulated by C addition in the early phase of incubation. We conclude that FT-induced N2O emissions could be reduced through incorporation of mature crop residues and the subsequent immobilization of mineral N, especially in C-rich soils.

No abstract