Hydraulic pump failures may be related to hardware or problem in oil. In this study, the excavator hydraulic pump failures were investigated by using visual observed and measuring the part component. The disassembled process of the pump was performed considering the manual part book of the excavator hydraulic pump. The abrasive wear on the pump slipper and swash plate was observed by comparing the guidelines for the reusable part. The value of more than 1.07 mm clearance within piston and cylinder bore was measured then the results over the allowable limit considering the manual part book. Properly analyzing of component failure can provide valuable information about what caused the failure and thus can be to avoiding future unscheduled downtime.