No abstract

In this work, cellulose fibres extracted from bamboo culms were used to fabricate two types of cellular materials: rigid foams and fibrous networks. A relatively simple and low-technology fabrication method is presented, using natural binders and blowing agents to manufacture rigid foams, and fibrillation by partial hydrolysis in H2SO4 to manufacture fibrous networks. The compressive response is related to the internal microstructure and processing parameters. In the case of fibrous networks, the achievable relative density range is determined by the length of initial fibres and extent of external fibrillation. The compressive properties are dictated both by the density of the network and strength of the fibrous bridges, showing a linear stiffness-density relationship due to the length of fibres, and an inverse relationship at increased external fibrillation. The rigid foams showed an orthotropic internal microstructure but nearly isotropic compressive response, due to the influence of the interpenetrating void structure on the deformation and fracture mechanisms. The results show the potential of bamboo-fibre porous materials as low cost, lightweight structural materials.

No abstract

No abstract