Due to their excellent stability and zero leakage capability, thrust bearings with herringbone spiral grooves are frequently used in transmission mechanisms. However, the lubrication mechanism of thrust bearings has not been clearly understood and explained, preventing the optimization of the bearing performance. Thus, this paper is devoted to solving this problem by building a three-dimensional finite element flow model. In this model, the change in viscosity temperature is considered using Roelands equation, and the turbulence and cavitation are taken into consideration. Using the established model, the influence of parameters such as spiral angle, groove width ratio, and rotational speed on the cavitation area of the thrust bearing are analyzed. The pressure contour and speed distribution are obtained inside the clearance, as well as the volume fraction of the gas phase at the end face. Finally, according to the analysis results, the optimum structural parameter for the herringbone spiral groove structure is proposed, which enables higher bearing stability and provides a reference for engineering practice.

Purpose Herringbone groove thrust bearings are typically used in high-speed, light-load applications, such as spindle motors for hard disk drives. In the past researches, the effect of shaft misalignment was little considered. This study aims to reveal effects of shaft misalignment on the microscopic flow regime in the water-lubricated herringbone groove thrust bearing. Design/methodology/approach The liquid film in a thrust herringbone groove bearing was investigated by computational fluid dynamics. The effects of micro-grooves on the flow field were carefully explored. Two-dimensional liquid films at four different sites were examined for obtaining the rich flow field properties. Findings The distributions of pressure, temperature and water vapor volume fraction were obtained, the micro hydrodynamic effects were formed by the herringbone grooves and the effects of the shaft misalignment on lubrication and sealing performance could be found. Originality/value The influence of misalignment on the herringbone groove thrust bearing performance was investigated in detail. The obtained results could give the reference guideline for the bearing design.