No abstract

This study applies shear deformation shallow shell theory to inspect the acoustic behavior of laminated composite infinitely long doubly curved shallow shells subject to a radiating oblique plane sound wave. Herewith, a procedure is developed to investigate sound transmission loss through this shell, clarified as a ratio of incident power to transmitted power in the existence of mean flow. In a further step, displacements are developed as a linear combination of the thickness coordinate to designate an analytical solution based on shear deformation shallow shell theory. Consequently, an exact solution for sound transmission loss is brought forward by combining acoustic wave equations as a result of wave propagation through this shell with doubly curved shell equations of motion. Afterwards, the accuracy of the present formulation (shear deformation shallow shell theory) is determined by comparing the achieved results with those available in the literature and some assumptions associated with the geometric specifications of the plate are investigated. Finally, because of the remarkable achievement of the current formulation results in reduction of noise transmission into such structures, some effective parameters on sound transmission loss are used in numerical results, to solve this problem.

No abstract

This paper presents an analytical model to embed porous materials in a finite cylindrical shell in order to obtain the sound transmission loss coefficient. Although the circumferential modes are considered only for calculating the amount of the transmitted noise through an infinitely long cylinder, the present study employs the longitudinal modes in addition to circumferential ones to analyze the vibroacoustic performance of a simply supported cylinder subjected to the porous core based on the first order shear deformation theory. To achieve this goal, the structure is immersed in a fluid and excited by an acoustic wave. In addition, the acoustic pressures and the displacements are developed in the form of double Fourier series. Since these series consist of infinite modes, it is essential to terminate this process by considering adequate modes. Hence, the convergence checking algorithm is employed in the form of some three-dimensional configurations with respect to length, frequency and radius. Afterwards, some figures are plotted to confirm the accuracy of the present formulation. In these configurations, the obtained sound transmission loss from the present study is compared with that of the infinite one. It is shown that by increasing the length of the structure, the results are approached to sound transmission loss of the infinite shells. Moreover, a new approach is proposed to show the transverse displacement of a finite poroelastic cylinder at different frequencies. Based on the outcomes, it is found that by enhancing the length of the poroelastic cylinder, the amount of the transmitted sound into the structure is reduced at the high frequency domain. However, the sound insulation property of the structure is improved at the low frequency region when the radius of the shell is decreased.

In this study, a robust controller against the uncertainties in piezoelectric patches including sensor and actuator is designed based on sliding mode method to control the radiated sound from cylindrical shells. Accordingly, in order to extract and discretize the dynamic equations of a smart cylinder equipped with piezoelectric patches, the Hamilton’s principle and the Rayleigh-Ritz method are, respectively, used . The radiated sound is estimated by the Kirchhoff-Helmholtz integral and the acoustic structural sensing method. Furthermore, an innovative approach is proposed on sliding mode control to model system uncertainties and design robust control signals against these disturbances. Using effective control signals for each mode is the applied methodology for establishing independent sliding surfaces. In fact, it is attempted to relate between actuator matrix determinant and system control ability in generating the efficient control signals and error reduction due to actuators uncertainties. By the aid of this relation, optimization of the actuators position according to the genetic algorithm is implemented. The obtained results show that by optimizing the actuators position not only the appropriate performance of the system in controlling the radiated sound from the structure is enhanced but also the essential control voltage for each actuator is significantly decreased.