No abstract

Mechanical alloying has recently attracted considerable attention as researchers try to improve materials properties. The process can be performed at room temperature and homogeneous alloys can be produced. In this work Fe–28 wt. % Al; Fe–26 wt. % Al–2 wt. % Sn and Fe–26 wt. % Al–2 wt. % V alloys were synthesized by mechanical alloying to investigate the effects of tin and vanadium additions on the structural and microstructural properties of Nanocrystalline FeAl Alloy. Fe72Al28, Fe72Al26Sn2 and Fe72Al26Sn2 were ball milled for 30 h under argon atmosphere using a rotating speed of 200 rpm with 15 min pause time after every 15 min running time. The structural and microstructural properties of the ball milled powders were analyzed using X-ray diffraction (DRX) and Mössbauer spectroscopy techniques. The final powders are characterized by an average crystallite size of 10 nm for the Fe72Al28 alloy, 6 nm for the Fe72Al26Sn2 alloy and 19 nm for the Fe72Al26V2, accompanied by the introduction of a lattice strain of order of 1.55 %, 0.78 % and 0.80% respectively. The Mossbauer study of the Fe72Al26V2 samples showed doublet with isomer shift IS= 0.17 mm/s and three magnetically split sextet.

No abstract

The object of our research is to combine the properties of Mangalloys and nanoscale advantages in order to enhance the performance and extend the range of applications in the field of work-hardening parts such as railroad components, armor, and modern auto components. We have produced a high-manganese austenitic steel nanomaterial containing more than 12 wt% Mn, which is the level of Mn in Hadfield steel. This study experimentally determined the process of phase transitions involved in Fe–13 wt% Mn–1.2 wt% C alloy during mechano-synthesis and after subsequent annealing. The milling time ranged from 0.5 to 24 h. The unique features of the nanocrystalline structure and the changes in microstructure as a function of milling time were investigated by X-ray diffraction analysis, differential scanning calorimetry, and scanning electron microscopy coupled with EDX. The grain sizes and microstrain of the milled powder were determined. A thorough study has been done on the sample where a new phase fcc (at 24h of MA) was formed.The object of our research is to combine the properties of Mangalloys and nanoscale advantages in order to enhance the performance and extend the range of applications in the field of work-hardening parts such as railroad components, armor, and modern auto components. We have produced a high-manganese austenitic steel nanomaterial containing more than 12 wt% Mn, which is the level of Mn in Hadfield steel. This study experimentally determined the process of phase transitions involved in Fe–13 wt% Mn–1.2 wt% C alloy during mechano-synthesis and after subsequent annealing. The milling time ranged from 0.5 to 24 h. The unique features of the nanocrystalline structure and the changes in microstructure as a function of milling time were investigated by X-ray diffraction analysis, differential scanning calorimetry, and scanning electron microscopy coupled with EDX. The grain sizes and microstrain of the milled powder were determined. A thorough study has been done on the sample where a new phase fcc (at 24h of MA) was formed.

No abstract