In view of the insufficient signal detection sensitivity of Gas Insulated Switchgear (GIS), partial discharge (PD), ultra-high frequency (UHF), and failure to conform with GIS surface structure when the existing rigid stereo structure UHF sensor is built in, this paper, using rectangular patch antenna equivalent technique, trapezoidal ground plane technique, and coplanar waveguide (CPW) feed line index asymptotic linearization technique, conducts research on a flexible built-in high-sensitivity elliptic monopole antenna. The flexible antenna, with a thickness of only 0.28 mm, can be kept at a voltage standing wave ratio (VSWR) of less than three in the 300 MHz to 3 GHz band under the curvature radius of 0, 100, 300, and 500 mm, and at less than two in the 650 MHz to 3 GHz band. Through the true 220 kV-GIS partial discharge experimental platform built to analyze the high frequency electromagnetic wave detection performance of the built-in flexible antenna, it is shown that the flexible built-in high-sensitivity elliptical monopole antenna designed in this paper can effectively detect the characteristic signals of high-frequency electromagnetic waves emitted by partial discharges with an average discharge amount below 10 pC.

The installation of automotive electrical switches is a complex three-dimensional space assembly project which has high requirements for installation accuracy. In order to improve the installation effect of automotive electrical switches, this paper applies the PSO-BP neural network algorithm to automotive electrical switches and integrates PSO and ELM algorithms. The training speed of the ELM model is fast, the model generalizes the data well, and the noise data have little effect on the model. Moreover, this article combines simulation research to evaluate the effect of this algorithm. After confirming the performance of the effect, this paper uses a case study to study the effect of the application of the PSO-BP neural network algorithm to the automotive electrical switch. The research results show that the CAD-assisted 3D assembly system of automobile electrical switch considering PSO-BP neural network algorithm has a good effect.