No abstract

No abstract

Niobium bearing ultralow carbon micro alloyed dual phase steel grade steel with chemical composition of 0.045 wt.% carbon, 0.04 wt.% niobium, 0.59 wt.% chromium, 0.9 wt.% manganese, 0.28 wt.% silicon is investigated. The design of thermomechanical treatment needs knowledge about the flow behaviour at high deformation temperatures, to be used for this steel in industrial plants. Therefore, this work aims to predict, for the investigated steel, the flow behaviour and mean flow stress. A phenomenological constitutive model is established to derive the flow stress using the hyperbolic sinusoidal Arrhenius mathematical model. The relation between stress and strain with Zener‐Hollomon parameter is studied. Mean flow stress has been figured out by measurements taken from compact slab production plant log data using a constitutive model. The constitutive model is further verified by multiple hits of flat compression setup mode at BährTTS820 physical simulator. The tests were performed under specific thermochemical schedule simulating compact slab production plant. The results show good agreement between the calculated flow stress, Non‐recrystallization temperature and experimentally measured values obtained from the physical simulation. Ferrite grain size is modelled and predicted then validated by experimental rolled specimens in a practical hot strip mill.

No abstract

No abstract