This article provides a comprehensive review of current research activities that concentrate on one‐dimensional (1D) nanostructures—wires, rods, belts, and tubes—whose lateral dimensions fall anywhere in the range of 1 to 100 nm. We devote the most attention to 1D nanostructures that have been synthesized in relatively copious quantities using chemical methods. We begin this article with an overview of synthetic strategies that have been exploited to achieve 1D growth. We then elaborate on these approaches in the following four sections: i) anisotropic growth dictated by the crystallographic structure of a solid material; ii) anisotropic growth confined and directed by various templates; iii) anisotropic growth kinetically controlled by supersaturation or through the use of an appropriate capping reagent; and iv) new concepts not yet fully demonstrated, but with long‐term potential in generating 1D nanostructures. Following is a discussion of techniques for generating various types of important heterostructured nanowires. By the end of this article, we highlight a range of unique properties (e.g., thermal, mechanical, electronic, optoelectronic, optical, nonlinear optical, and field emission) associated with different types of 1D nanostructures. We also briefly discuss a number of methods potentially useful for assembling 1D nanostructures into functional devices based on crossbar junctions, and complex architectures such as 2D and 3D periodic lattices. We conclude this review with personal perspectives on the directions towards which future research on this new class of nanostructured materials might be directed.

Room-temperature ultraviolet lasing in semiconductor nanowire arrays has been demonstrated. The self-organized, <0001> oriented zinc oxide nanowires grown on sapphire substrates were synthesized with a simple vapor transport and condensation process. These wide band-gap semiconductor nanowires form natural laser cavities with diameters varying from 20 to 150 nanometers and lengths up to 10 micrometers. Under optical excitation, surface-emitting lasing action was observed at 385 nanometers, with an emission linewidth less than 0.3 nanometer. The chemical flexibility and the one-dimensionality of the nanowires make them ideal miniaturized laser light sources. These short-wavelength nanolasers could have myriad applications, including optical computing, information storage, and microanalysis.

Highly sensitive nanowire switches have been created using ZnO nanowires. The light‐ induced conductivity increase, which is extremely sensitive to ultraviolet light, allows the reversibly switching of the nanowires between the “OFF” and “ON” states by an optical gating phenomenon analogous to the commonly used electrical gating. The Figure shows a field‐emission SEM image of a 60 nm ZnO nanowire bridging four Au electrodes.

This article surveys recent developments in the rational synthesis of single‐crystalline zinc oxide nanowires and their unique optical properties. The growth of ZnO nanowires was carried out in a simple chemical vapor transport and condensation (CVTC) system. Based on our fundamental understanding of the vapor–liquid–solid (VLS) nanowire growth mechanism, different levels of growth controls (including positional, orientational, diameter, and density control) have been achieved. Power‐dependent emission has been examined and lasing action was observed in these ZnO nanowires when the excitation intensity exceeds a threshold (∼40 kW cm–2). These short‐wavelength nanolasers operate at room temperature and the areal density of these nanolasers on substrate readily reaches 1 × 1010 cm–2. The observation of lasing action in these nanowire arrays without any fabricated mirrors indicates these single‐crystalline, well‐facetted nanowires can function as self‐contained optical resonance cavities. This argument is further supported by our recent near‐field scanning optical microscopy (NSOM) studies on single nanowires.

Since the discovery of carbon nanotubes in 1991 (ref. 1), there have been significant research efforts to synthesize nanometre-scale tubular forms of various solids. The formation of tubular nanostructure generally requires a layered or anisotropic crystal structure. There are reports of nanotubes made from silica, alumina, silicon and metals that do not have a layered crystal structure; they are synthesized by using carbon nanotubes and porous membranes as templates, or by thin-film rolling. These nanotubes, however, are either amorphous, polycrystalline or exist only in ultrahigh vacuum. The growth of single-crystal semiconductor hollow nanotubes would be advantageous in potential nanoscale electronics, optoelectronics and biochemical-sensing applications. Here we report an 'epitaxial casting' approach for the synthesis of single-crystal GaN nanotubes with inner diameters of 30-200 nm and wall thicknesses of 5-50 nm. Hexagonal ZnO nanowires were used as templates for the epitaxial overgrowth of thin GaN layers in a chemical vapour deposition system. The ZnO nanowire templates were subsequently removed by thermal reduction and evaporation, resulting in ordered arrays of GaN nanotubes on the substrates. This templating process should be applicable to many other semiconductor systems.