We reported on a polarization beam splitter based on a novel chalcogenide dual-core photonic crystal fiber. The glass matrix of the optical fiber is Ge10As22Se68. We used computerized numerical control precision drilling methods to manufacture preforms. Then the preform was drawn into an optical fiber with a regular hole structure. The maximum extinction ratio reached -32.76 dB with a 26.27 mm-long optical fiber. Numerical results show that the shortest working length of the designed polarization beam splitter is 636 µm. In addition, the modeling analysis based on the actual structure shows that the theoretical value is consistent with the measured value.

Cr2+‐doped II‐VI crystals have witnessed an excellent gain media for continuously tunable and femtosecond‐pulsed lasers. Despite this, major challenges persist toward realizing ultrabroad emission bandwidth and efficient Cr2+‐doped fiber due to the valence diversity of Cr, especially in chalcogenide glasses. Here, we propose to prepare Cr2+:ZnSe/As2S3‐xSex composite glasses by Hot Uniaxial Pressing (HUP), a method that sinters uniformly mixed crystal and glass powders into geometrically designed composite chalcogenide glasses. The densification of the composite glasses reached 99.88%, indicating that a few or none pores remain. Our research shows that Cr2+:ZnSe crystals have good performance in chalcogenide glasses, and the composite glasses have the potential to be made into mid‐infrared–doped fibers. It was demonstrated by scanning electron microscopy (SEM) and X‐ray diffraction (XRD) that the composite glasses have a uniform Cr2+:ZnSe distribution and no crystal disintegration. The transmittance of the composite glasses was significantly improved by tailoring the refraction index. The mid‐infrared (MIR) fluorescence and decay of the glasses were measured. The lattice constant was measured, calculated, and discussed to reveal the influence of sintering process on lifetime.

No abstract

No abstract

We reported an ultrabroadband mid-infrared (MIR) emission in the range of 1800 nm–3100 nm at room temperature (RT) from a Cr2+:ZnSe-doped chalcogenide glasses (ChGs) and studied the emission-dependent properties on the doping methods. A series of Cr2+:ZnSe/As40S57Se3 (in unit wt.%) glass-ceramics were prepared by hot uniaxial pressing (HUP) and melt-quenching methods, respectively. The glass-ceramics with MIR emission bands greater than 1000 nm were successfully prepared by both methods. The effects of matrix glass composition and grain doping concentration on the optical properties of the samples were studied. The occurrence state, morphology of the grains, and the microscopic elemental distributions were characterized using x-ray diffraction (XRD), scanning electron microscope (SEM), and energy dispersive spectrometer (EDS) analyses.