Diabetes is widely considered as a silent killer which affects the internal organs and ultimately has drastic impacts on our day-to-day activities. One of the fatal outcomes of diabetes is diabetic foot ulcer (DFU); which, when becomes chronic, may lead to amputation. The incorporation of nanotechnology in developing bio-sensors enables the detection of desired biomarkers, which in our study are glucose and L-tyrosine; which gets elevated in patients suffering from diabetes and DFUs, respectively. Herein, we report the development of an enzymatic impedimetric sensor for the multi-detection of these biomarkers using an electrochemical paper-based analytical device (µ-EPADs). The structure consists of two working electrodes and a counter electrode. One working electrode is modified with α-MnO2-GQD/tyrosinase hybrid to aid L-tyrosine detection, while the other electrode is coated with α-MnO2-GQD/glucose oxidase hybrid for glucose monitoring. Electrochemical impedance spectroscopy has been employed for the quantification of glucose and L-tyrosine, within a concentration range of 50–800 mg/dL and 1–500 µmol/L, respectively, using a sample volume of approximately 200 µL. The impedance response exhibited a linear relationship over the analyte concentration range with detection limits of ~58 mg/dL and ~0.3 µmol/L for glucose and tyrosine respectively, with shelf life ~1 month. The sensing strategy was also translated to Arduino-based device applications by interfacing the µ-EPADs with miniaturized electronics.

Stoichiometric compositions of NiO were prepared by the standard chemical co-precipitation method to inspect the effect of the calcination temperature on structures, morphology, and physical properties. The samples were calcined at three different temperatures viz. 350 °C, 550 °C, and 650 °C for 5 h. X-ray diffraction analysis confirmed the cubic (Fm-3m) structure of the prepared samples. The average crystalline size increases from 41 nm to above 100 nm as the calcination temperature increases in the same time period. In Fourier transform infrared spectra, the spectral absorption bands were observed at ~413, 434, and 444 cm–1. The bandgap energy of NiO particles is decreased from 3.6 eV to 3.41 eV as the calcination temperature increases. The magnetic analysis confirms that the magnetization value of NiO is invariably decreased with a rise in the calcination temperature.

In this article, the dielectric properties of poly (9-vinylcarbazole) (PVK) and ferrocene-doped PVK thin films are studied. The thin films were grown by the isothermal solution casting technique. Dielectric properties of grown films were studied as function of ferrocene concentration, frequency, and temperature. The relative permittivity (ε′) is increased with increasing ferrocene percentage (~1%) due to the free charge carriers. The relative permittivity decreases for higher ferrocene percentage (~2%). However, the relative permittivity of PVK and ferrocene-doped PVK samples remains almost constant for studied temperature range (313–413 K). The frequency dependence of tan δ for all samples is studied. The frequency dependence of dielectric parameter exhibits frequency dispersion behavior, which suggests all types of polarization present in the lower frequency range. The loss tangent (tanδ) values are larger at higher temperatures in the low frequency region. However, the tan δ values at different temperatures are almost similar in the high frequency region. It is observed that the relative permittivity is maximum, dielectric loss is minimum, and AC conductivity is minimum for 1% ferrocene doped PVK as compared to pure PVK and 2% ferrocene doped PVK samples.