Controlled crosslinking of collagen gels has important applications in cell and tissue mechanics as well as tissue engineering. Genipin is a natural plant extract that has been shown to crosslink biological tissues and to produce color and fluorescence changes upon crosslinking. We have characterized the effects of genipin concentration and incubation duration on the mechanical and fluorigenic properties of type I collagen gels. Gels were exposed to genipin (0, 1, 5, or 10 mM) for a defined duration (2, 4, 6, or 12 h). Mechanical properties were characterized using parallel plate rheometry, while fluorigenic properties were examined with a spectrofluorimetric plate reader and with a standard, inverted epifluorescent microscope. Additionally, Fourier transform infrared spectroscopy was used to characterize and track the crosslinking reaction in real-time. Genipin produced significant concentration- and incubation-dependent increases in the storage modulus, loss modulus, and fluorescence intensity. Storage modulus was strongly correlated to fluorescence exponentially. Minimal cytotoxicity was observed for exposure of L929 fibroblasts cultured within collagen gels to 1 mM genipin for 24 h, but significant cell death occurred for 5 and 10 mM genipin. We conclude that genipin can be used to stiffen collagen gels in a relatively short time frame, that low concentrations of genipin can be used to crosslink cell-populated collagen gels to affect cell behavior that is influenced by the mechanical properties of the tissue scaffold, and that the degree of crosslinking can be reliably assayed optically via simple fluorescence measurements.

We have designed and developed a microfluidic system to study the response of cells to controlled gradients of mechanical stiffness in 3D collagen gels. An 'H'-shaped, source-sink network was filled with a type I collagen solution, which self-assembled into a fibrillar gel. A 1D gradient of genipin--a natural crosslinker that also causes collagen to fluoresce upon crosslinking--was generated in the cross-channel through the 3D collagen gel to create a gradient of crosslinks and stiffness. The gradient of stiffness was observed via fluorescence. A separate, underlying channel in the microfluidic construct allowed the introduction of cells into the gradient. Neurites from chick dorsal root ganglia explants grew significantly longer down the gradient of stiffness than up the gradient and than in control gels not treated with genipin. No changes in cell adhesion, collagen fiber size, or density were observed following crosslinking with genipin, indicating that the primary effect of genipin was on the mechanical properties of the gel. These results demonstrate that (1) the microfluidic system can be used to study durotactic behavior of cells and (2) neurite growth can be directed and enhanced by a gradient of mechanical properties, with the goal of incorporating mechanical gradients into nerve and spinal cord regenerative therapies.

A major obstacle in creating viable tissue engineered constructs using electrospinning is the lack of complete cellularization and vascularization due to the limited porosity in these densely packed fibrous scaffolds. One potential approach to circumvent this issue is the use of various gradients of chemical and biophysical cues to drive the infiltration of cells into these structures. Towards this goal, this study focused on creating durotactic (mechanical) and haptotactic (adhesive) gradients through the thickness of electrospun hyaluronic acid (HA) scaffolds using a unique, yet simple, modification of common electrospinning protocols. Specifically, both mechanical (via crosslinking: ranging from 27%–100% modified methacrylated HA, MeHA) and adhesive (via inclusion of the adhesive peptide RGD: 0–3mM RGD) gradients were each fabricated by mixing two solutions (one ramping up, one ramping down) prior to electrospinning and fiber collection. Gradient formation was verified by fluorescent microscopy, FTIR, atomic force microscopy, and cellular morphology assessment of scaffolds at different points of collection (i.e., with scaffold thickness). To further test the functionality of gradient scaffolds, chick aortic arch explants were cultured on adhesive gradient scaffolds for 7 days and low RGD-high RGD gradient scaffolds showed significantly greater cell infiltration compared to high RGD-low RGD gradients and uniform high RGD or uniform low RGD control scaffolds. In addition to enhanced infiltration, this approach could be used to fabricate graded tissue structures, such as those that occur at interfaces.

The ability of tissue engineered scaffolds to direct cell behavior is paramount for scaffold design. Cell migration can be directed by various methods including chemical, adhesive, mechanical, and topographical cues. Electrospinning has emerged as a popular method to control topography and create fibrous scaffolds similar to that found in extracellular matrix. One major hurdle is limited cell infiltration and several studies have explored methods to alter electrospun materials to increase scaffold porosity; however, uniform cell distributions within scaffolds is still limited. Towards this, we investigated the motility of HUVECs on a model system of electrospun hyaluronic acid fibers under a gradient of VEGF and found that topographical cues dominate cell motility direction. Using time-lapse microscopy, cell aspect ratio, and migration angle were measured; cells were directed in a chemical gradient and/or on aligned electrospun fibers. Measurements of the persistence time demonstrated an additive effect of the chemical gradient and fiber alignment. However, when fibers were aligned perpendicular to a chemical gradient, cells were directed by fiber alignment and there was no effect of the chemical gradient. These results suggest that topographical cues may be more influential than chemical cues in directing cell motility and should be considered in material design.